You and me both bro. The Mpc305spf and related machines have to be the worst machine i've ever worked on. Including Canon, HP and Ricoh. The amount of work and things that can go wrong with these...
Type: Posts; User: catgoldfish
You and me both bro. The Mpc305spf and related machines have to be the worst machine i've ever worked on. Including Canon, HP and Ricoh. The amount of work and things that can go wrong with these...
You need to replace both of those sensors. They're on the machine side of the copier on the left side of the fusing unit. Two photo interupters. Sorry dont have part number. They cause both sc 549...
I would. Lots of work for a small little machine. Works ok if you use it for average home use not in a busy office like most of my customers do. 10,000 to 20,000 copies per month. Crazy !
Ok guys machine no longer has sc 325. For me it ended up beng the dev colour motor. I can see these blowing a lot. One motor to drive all three colour developers. There is a lot of torque this motor...
Guys just an update on this trouble shooted further. No color devs turning. Checked and took out drive assembly all looks ok, thought maybe a belt fell off or something seized. Unfortunately there...
Will do guys thanks for your tips. Will post solution when I go back on Monday. I suspect the drive unit myself. Real pain to get it out.
The code is always there from startup to shutdown. Ive tried to test the output and i can hear a noise in the back so i assume the motor is turning but its not turning the devs. There is one motor...
Has anyone had this code on a Mpc 406. SC 325. Something to do with the color dev motor. Tried the easy things like reseat connectors, firmware and replaced all the pcu's. Just trying to gather info...
Hi all
Went back to this machine this morning and removed the rear area. Found a lot of loose cyan toner. The problem was the main drive unit. The belt that drives the itb unit fell off. It...
Hi there which ball bearing? Location?
Ok. I will look at the relay sensor area. Thanks.
Will do. Thanks!
I pretty sure it's fuser entrance jam. I know this is a different model but most jam codes are the same for most machines.
...
No relevant codes pertaining to my issue now. There were codes sc899 and others like that. I will let you know what happens. The model thankfully has been discontinued but I have so many of them....
Well nothing comes out cause of the jamming but i can see small 1/4 inch wide strips of all 4 colours when i remove the itb. Thats all that it puts on there. I think it puts it on there to start the...
Yes i tried the itb motor hi and lo. I can hear the motor turning but no itb belt turning. Was cheating the door open. Sp5804-022 and 023.
Hey all
Have an Mpc305 spf giving me some grief. Constant J018 jams meaning the Fuser entrance sensor. Have check sensors in sp58xx all toggling 1 to 0. Paper jams right by the itb unit and...
I did rep both of them. Problem is now fixed. It was the itb interface connector at the back of the machine. There were a couple of metal connectors that were mushed up. Was able to grab it off...
I've tried 3 of them. I will look for pinched wires.
Reflashed firmware.
Yes i've checked all that also. Replaced itb assembly( encoder sensor) . Bicu. Iob. Power supply. Image transfer contact motor. So stressed about this machine. Anything else?
The encoder sensor is on the itb assembly. I've rep the whole thing.
Yes checked it with input output.
Thanks. Still down
Well it was giving the code with the old one and i put a brand new assembly not belt in. Do you need to run a program for the whole assembly?