Search:

Hi. Machine still not working. Any one know how to discount the scanner soo machine will not calibrate the scanner . Please share any information . Please i am in big trbl. I spend a lot of money on...

I checked on internet there is only user manual. But noting in it about the scanner . This is my own machine i bought from one company they never open this . Soo i try tu install in first i put the...

Hi. I just buy new oce colorwave 650 printer . And on the first time installation i put the wrong serial number. Now machine start the calibration but at the end machine give error 16716.
I cant...

Sir i try all but the code still same. I changed the IH board and power Board . But nothing happens. Any other ideas.

Sir what about the service mode ??

Hello . 6950 error coming. And i cant enter in service mode . 1087 1087 not working. I try all the code which is available for Kyocera. But i can't enter. Please help.

Sir plz provide any free link

Hello i need latest frimware for my machine.

Please help. Thanks

I neet frimware for this models. Full kit in english .EU version machines... Please any one can help me... Thanks in advance..

thank you very much , i appreciate your help

Hi. This my customer machine giving this error . I already chang the separation charger corona wire but the error is still same. Any help?

I replaced the power supply . Machine ia working now. Thanks to all

Hi. My machine not working i check the cable. All the fuse on the power supply is ok. But machine is dead . Power not coming at all . Even no notification light on the panel. Please help.

Soo what to do know? The company is not providing any update. I really need to reset the machine. Please help . Any idea to change the service code .

I already try all this. But this machine is not going in service mode. Is there any other way to go in the sumilation. Or any other special code?

Maintinance A B C

Also i i changed the fuser unit . I want to reset the fuser counter.

Hello. I have taskalfa 5551 ci i need to reset maintinance error but the service mode 1087 1087 and 0614 1010. Please help. Thanks.

I changed the nvram and now the machine is stop on konica minolta logo on display. Machine is running but the display stays on the logo.

Yes there is beep when we off and on from the sub- power.

Hi. I need bizhub c 203 frimware. Also tell me how to upload the frimware. I m new in this . Thnx

Hi. I have bizhub C 203 before its working fine but suddenly the display got off and machine not running. When i switch on the machine no display only power light is working. machine stop working i...

The machine not giving print from network. Geting error ng #860. I try all the drivers but the same issue. So one of my friend give me the advice to reset all the memory and then try again. So i...

Hi. I reset all the memory from service mode in clear option. Now machine have this code when i start the machine. I try to use holding 1&9 option but noting is happening. Also in downloading mode...