Search:

SOLVED SOLVED

thanks so much to everyone who jumped on my problem to offer a solution. the cuprit(s) were there thermostats.i had already ordered the three thermostats 192C X 2 and the middle...

thanks i have checked and double checked. the only thing am yet to change is the thermostats which i have ordered. but what beats my mind is that the furser doesnt even turn. i mean both rollers. is...

i experienced something similar with aficio 1075 once.. after about a month i found out one of the lamps was out. i would attribute it to the lamps. check the lamps.

Thanks slimslob, i have opened the doors and cleared the error. screen was error free for a few seconds apparently waiting for fuser to warm up. then after about 30.40 seconds bam!! sc 552.

so i...

i did a 5801 002 and rebooted. still nothing

I just entered service mode and restarted the machine? do i need to go further by entering numbers?

thanks i have checked all the connectors and theres not obstruction. the rollers do not also turn at all. no visible activitity in the fuser section.

so far they are all intact.

aficio mp 5500 keeps throwing sc 552 on startup. when i cheat the doors i realise the lamps do not come on.
i have changed the three lamps and also the two thermistors. i am really going crazy....

@sandmanmac was right .. I checked the PSU Carefully and a couple of stuff were fried. so i changed the psu and bam.. the old man is back..

thanks everyone. for the effort.. beers are on me.. or...

Thanks man i suspected the PFC so i changed the board from another machine which was not in use. problem however is it also went down with the same issue before it went out of use.

so after the...

yeah i tried booting with the trays out but it didnt work.. thanks

No way i refuse to give up on this old dude.

hello folks..

i been using my 1075 smoothly today when it suddenly gave an error code SC 624. afterwards a phantom "tray 4" appears on the control panel though the copier has only 3 trays. ...