There is a good chance that it is the main board. This board has been redesigned to help with this failure.
Type: Posts; User: kkendric
There is a good chance that it is the main board. This board has been redesigned to help with this failure.
did you shift the DV unit back?
1 GB DDR2 RAM PC2-6400S-555-12, $ 19.95 +8.95 shipping at Amazon.com should work. I took specifications off of Buffalo chip in our 3500i
Did you take the Eeprom out of your board and place it into the replacement board ?
I think it is in the Eeprom
Fuser error, reset fuser error and fuser error comes back. what do I do now? Look for a different line of work. Come on, it doesn't take a lot of common sense to follow this one through.
YC1 has a connector plugged into it.
YC9 does not have a connector plugged in to it.
Did you try to calibrate the touch screen that you had replaced?
Simulation 201 is for checking and calibrating...
What are all the options on this machine. They could be :3.5 inch IDE HDD for copier, Print system U, Laptop IDE for print system, Fax system which includes a sub power supply and finishers. the...
Service bulletin B293-2K3-0019 outlines this condition as being caused by a defective component on the engine board.
A transistor fries on the engine board.
Date and time correct? when this happens?
Have you tried it without pressing status / job cancel first ?
Hire a technician, You should not attempt the above procedure unless you know what you are doing, you may regret it.
I believe he was having touch screen issues, replaced touch screen, still had issues. Was asking for firmware and he apparently got it. Apparently ay 12% sounds like the machine was unplugged.
1....
302K394011 is the part number, Kyocera had a bulletin regarding this issue and it is caused buy a component on the main board. Hytec does repair this board with a one year warranty.
Insure that the Print system firmware and NIC firmware are up to date as well.
Is it possible that someone's wireless device is using the same IP address? This could explain the randomness.
The instructions can be found in the Fax instruction guide, Fax System U I believe.
Have you even checked what the default paper size and tray is for Fax?
WD AV-25 160 GB Internal Hard Drive for Video Storage - 24/7 Reliability - 2.5" - Sata 3 Gb/s, 5400RPM, 16MB Cache, 9.5mm form factor, 3yr Warranty (WD1600BUCT)Item#: W10-7370 | Model#:...
Interesting, I was on the phone for about 15 minutes yesterday (WED) with a customer that needed this information as well, however the coin op that he wanted to use had a larger connector than YC-33....
This was a great machine in its day, still is a very reliable machine today if maintained correctly. This series is about twelve years old. the firmware has not been updated in about eight years and...
KYOCERA Document Solutions | Business Printers, Color MFPs and Document Management Solutions
Select Downloads.
Select Category
Select Model
Select Technical
Select Manuals
Select Fax W...
If you have performed this procedure correctly and it still fails you may have defective disk drives, F-DIMM's, etc.
Have you tried,
For initial login, use the predefined “Admin” as the Use Name, and “Admin” as the
Password to access all the pages. For initial login, use the predefined Admin as the Use
...