Search:

Did he do the toner install the right way with adding toner in Service Mode?

I have an ir3245 copier that the little plastic keeper broke off of cassette #one. This is the smaller of the three wheels and is kept on by the metal clip. The plastic claw that keeps the tire on...

Our Katun connection is out of these toners and we are looking for other suppliers. These two toners seem to be rouge toners for some reason

Canon ir 4535 GPR 38
Canon ir 6555 GPR 57

Thanks in...

Service mode may be different than other Canons?

for 1022 = Enter the Service mode. (Main Menu > 2 > 8 > Main Menu)
2 and 8 not same time.

Fortunitly I told my customer that I had to blow away all of her user settings and she elected to re-boot it once a week when it happens.

Take off the back cover and look 2/3rds of the way down the back. The will be a yellow sticker with HDD and two hands holding hard drive. If you have two connectors laying there ( one 4 pin Yellow...

Would a backup of the HDD using the SST save all the scan-to and SMB settings? I've never done it.

TIA, Hopper

Pls let us know as I am working on the same here. Thx.

Same. Start with checking waste toner box to see if full.

My customer has had this CanonIR 3245 for over a year doing well and now it goes to sleep. The control panel is lit and everything seems normal but it will not copy or print. THIS IS NOT SLEEP MODE....

Also:

You are in Europe trying to print on A4 paper, not LTR
Disconnect trys 3 and 4 paper feed unit. I have seen it cause start up stationary 0201 jams.

The 0105 and 0103 is run of th mill paper feed issues. 0105 says it tried to pick up once, 05 is a second attempt at a pick up.

THE 008* in the third column is VODOO. Boot your copier up and see...

No paper in doc feeder and green light stays on. The problem stays with the printer frame. Have switched with another machine (doc feed assemble, doc feeder PCB, formatter, updated firmware and cold...

How does one un-attach the finisher? The older ones you took the two screws on the back of top cover and opened up to unscrew the hold downs on the metal pariot beaks.

TIA:confused: