Had this issue. MFP-TB-1688:
Go into sim 55-1
SW 22
Data 8 change setting from 0 to 1.
Good luck!
Type: Posts; User: HikingAK
Had this issue. MFP-TB-1688:
Go into sim 55-1
SW 22
Data 8 change setting from 0 to 1.
Good luck!
I don't see it on the list. Our DSS stated if it's not on the list, then Sharp will not be supporting that model. Might pass that info onto sales...
Here's the Sharp Tech Tip:
40543
40542
Microsoft Office 365 will discontinue TLS v1.0 support. Sharp is addressing this by adding TLS v1.2 support on most models.
Technical Tip: TT-05148_1
I faced similar issues on older models. What has worked for me is cleaning both image registration / density sensors, reset all settings to default values in sims 50-10 & 50-20, & verify the sensor...
Had a similar issue with on a heavily used MX-6070N (F2-67). First inspected the hopper exit & cleared it of toner, then cleaned up the interior of machine & Yellow DV unit. Code came back the next...
I had this issue twice, once with a MX-2610N & MX-5111N. Both times, I resolved the issue by cleaning the image registration/density sensors, then performing sims 44-2 & 46-74. (See page 9-27 in...
Side 2 looks good, only skewing is on side 1. We attempted to adjust scan unit in the document feeder using sim 50-28. We also reset 50-6, 50-7, 50-10 & 50-12 to Sharp defaults. These appear to...
We have a law office that is having an issue with skewed images through the document processor, prints & internal docs are coming out without issue, as are copies from the platen glass. We've been...
Thanks everyone for your help. In the end, it was the primary transfer unit. We rebuilt it on site, so I hadn't pulled the transfer unit from the MX-3110N that I'd been swapping parts with. (The...
Hello everyone! My first post and I have an issue that is stumping me. Looking at a MX-2610N with image void issues in B&W, not color, after over 100 pages have run through. Reproducing the issue had...