If you'er onto historical fiction The Emperor and Conqueror series by Con Iggulden are great. Follows the lives of Julius Caesar in Emperor and Genghis Khan in Conqueror. Available on Audible if your...
Type: Posts; User: Ashbell
If you'er onto historical fiction The Emperor and Conqueror series by Con Iggulden are great. Follows the lives of Julius Caesar in Emperor and Genghis Khan in Conqueror. Available on Audible if your...
If you have a Knova Knowledge Center login you can find the manuals on there.
I have had this issue a few times. Most of the time it is the email address the copier uses to send out with has filled up. get the IT guys to empty the sent items folder and all should be good. This...
If it is a C454e than a TN-513 will fit, if it is just a straight C454 than TN-512K is the one you need.
Hey all,
Just wondering if anyone could help me out with some Firmware for a Canon IR3035. Have just recently lost our access to canon support as another business took over our area. Thanks all.
probably Life stop settings are still turned on, need to go into service mode and turn them off.
Yes they are Print outs straight from user mode
Pretty sure they just order it as needed, then just put the whole ream into the machine, its got the LCT as tray 3 so it can fit a few reams.
Its in a Hospital so i would assume it would be reasonably clean. They get their paper from us and it is he same paper we supply to most of our customers, they are the only ones to have this issue.
Definitely using originals, have seen too many machines completely destroyed by crappy toners.
Did Gradation, i dont think i mentioned that in my post.
Dev is just under half life
Hey all,
Have a recurring fault with a particular few machines in the one site. Every now and then the Prints get er dark, see attached. in the past we have replaced the IDC sensor, IDC sensor...
Sorry for Reviving an old thread but did you ever find a fix for this?
Could you possible explain to me how to do this, we have had a few machines that have had this error.
Thanks for your reply. I do close my eyes to the warning but my customers don't. and good old Google tells them things that they don't really need to know. It would be easier if they could be...
Hi everyone,
i was wondering if anybody knew a way of disabling the warning message on the 4 series machines. this is the L-1 warnings and so on. They usually show up on the screen as an [!]. in...
Had an issue like this a while ago. Ours was on black though, it was caused by a stripped Dev, unsure if it is the same but the patterns look exactly the same. Unfortunately i dont have my sample...
Hi guys, apologies for commenting on a "dead" post, but Konica Minolta have recently released a tech bulletin about this issue. If you have a service login you should be able to find the document on...