Search:

great idea i will seriously give that a shot.

is that the best solution ? it may disrupt production if it does not install properly, so i would need to install it on a separate computer to try it out, and if it works great, but if it doesnt...

inchecked the fiery download site they currently only offer Cws 6x

hi, i use fiery command workstation 5.3.1 with a konica c7000

under calibration i see the choice for ES1000 / Xrite DPT etc etc

How do install or enable ES2000 ?

based on all the previous advise i checked all the bits and pieces ... not electrical problem, all sensors and motors work.

it seems to be either the plastic piece that moves the metal part that...

how can i test these ? is there a dipsw setting that i can see the motor / solenoid status ?

picture from another angle ... bend which metal up or down ?

sensor blocked >>> Shared album - Zubinn Tan - Google Photos

sensor unblocked >>> Shared album - Zubinn Tan - Google Photos

60908...

picture from a diffrent angle ... sensor blocked / unblocked

if "bending" is required bend in which direction ?

blocked >>> Shared album - Zubinn Tan - Google Photos

unblocked >>> Shared...

Does this bypass tray mechanism look okay ?

see bigger picture >>> Shared album - Zubinn Tan - Google Photos

60865
https://photos.app.goo.gl/qyU4e5udLcGKKeAf8

maybe some bits need to be...

this board ? I see 2 flashing led

see bigger image >>> Shared album - Zubinn Tan - Google Photos

60863

is there a dipsw setting to test ps25 and m35 ?

if anybody would like to do a video call with me I be willing to pay hourly to help troubleshoot

the lift motor is connected 2 pin connector. I tried a new motor also….
but what you mentioned about the tray limit actuator may be something to look into

would you be able to give more details...

my pf601 paper tray died. so i removed it and want to use the bypass tray to run some jobs only to find it does not rise.

It does show up on the machine as bypass tray dipsw 36 is on

problem is...

after some digging around, i found this sensor to be mis-aligned ... so since the machine is old and the sensor doesnt snap back to where it should be i resorted to some hot glue.

so now it is...

I bought the press second hand i unfortunately dont have manuals,. There are also no error messages except load paper message on the screen which makes sense why the drawer does not rise.

where can i find this connector, on the drawer side or the back side of the machine ?

would you happen to have some instructions / pictures i can reference to try remove the tray ?

message on screen is load paper.

since tray does not rise makes sense for press to say load paper

i have a konica pf602 used on a c7000 machine.

tray 5 does not rise, tray 4 is okay.

How can i do some test to figure out what the issue is so i can fix it.

z

Is it a0y5m55100?

I see this part is for c6500 but it did not say it is for c7000 or c6000

Is there an equivalent for c7000?

Using Pf602 feeder, printing from trays are okay

where is this adjustment screw ? in the tray ?

donyou know the part number of this sensor ?

any instructions on how to align the tray ? I got this machine used.