From Sharp technical:
A4 Prints and copies slowly from Tray one. All other trays OK and A4R and A3 are Ok too. Mono Black and white prints fine.
paper exits the machine and there is a delay...
Type: Posts; User: ridgemill
From Sharp technical:
A4 Prints and copies slowly from Tray one. All other trays OK and A4R and A3 are Ok too. Mono Black and white prints fine.
paper exits the machine and there is a delay...
Does it only appear with the black text, and not any other colours?
If so, it can also be faulty black drum, or wrong toner was used.
Make sure the user has the SMTP AUTH enabled:
Enable or disable SMTP AUTH in Exchange Online | Microsoft Learn
The fusers should have different wattage lamps and possibly one fuser sleeve unit won't include the internal shutter.
Make sure the finisher firmware is up to date. Both SR3140/SR3150 & SR3160/SR3170, have updates that fix false full tray conditions.
BP-FB703 is the new PN in the updated handy guide.
If CUPS is still available (I believe it will soon be deprecated), you can set the printer's default settings by navigating to http://localhost:631/printers
It is part of the multi-feed / bypass tray.
Part number 26:
60379
Have had a few fail, and sometimes the connector can come loose.
According to the manual: Turn on whilst holding 2+7+8, wait until the spinning circle icon appears, release buttons.
You will need to update the emergency firmware via a PC directly connected via...
Any post that ends in the word "print", will show this view.
Which is a tad annoying for a forum dedicated to printing/copying equipment.
You can re-create the post without the word "print",...
From Sharp FreshDesk:
QUERY
Finishing options not recognised on the control panel
RESOLUTION
Make sure the Printer Driver Packager NX is updated, latest is 1.1.26 (released Feb 2023).
Support for MP C***4ex (assuming you are meaning this model range) was fixed in 1.1.12.
The latest FW for this model was released in 2010, so very unlikely it will make much of a difference.
If you have 2-factor on Gmail it should work, if you generate an App password. You may have...
As this is a rebadged Lexmark, doing a quick Google search shows this error as a DNS lookup failure.
Have you tried using Google's DNS (if the server is outside the network)?
Sharp removed the SW for the later models, you either have to request a PW reset code from Sharp; or, do a Storage Backup from another device (admin password is stored within).
They use an eMMC, in the parts manual it is called MFP program ROM in the PWB section.
It varies between models and regions, but the suffix is VHI0MFP...
It should look like an NVMe, but...
Firmware won't fix this, either you have enabled IEEE802 security settings and disabled USB type B access.
Or, you have a broken network port. (USB type B is usually disabled by default)
If you go to User Control > Default Settings > and tick Disabling of Printing by Invalid User
Now only print jobs with a user code can print.
The printer driver will need to have the pin...
Make sure that Printer Properties > Configuration > Printing Policy > Document Filing, is set to OFF (unticked)
Do you want Print Release instead?
With Print Release, you can set all print...
Tried this ourselves, did not work. The BP could not see any networks and could not connect, even with explicit SSID and password entered.
Also tried a WiFi module from a CR4 and CR4.5 range, same...
I am unsure why this would be necessary. If the prints are sensitive; then they will need to stay with the machine, whilst it is printing.
If it runs out of paper, then they can manually cancel...
Personally, I would not recycle an old system.
Instead, I would use a newer system; but install a hypervisor like VirtualBox or Hyper-V.
200k mono & 210k colour (actual mono being 410k usage) is past the PM life of the black drum (400k)
To me, this looks a lot like a faulty drum cleaning blade.
You will be looking at an...
JPEG, TIFF, PRN, PCL, & PNG are standard on the BP-50Cxx / BP-55C26 range
PDF, PDF/A, Encrypted PDF, & PS requires MX-PK13
DOCX, PPTX, & XLSX requires MX-PU10
All the above is standard on the...
Like yourself, we have replaced everything with a POIND_N error, in the end we cured this by replacing the transfer separation solenoid: RPLU-0387FCZZ