Search:

if pins are all ok. I have also had success doing a NIC reset. Good luck

yes and thew were one of the Company that made 5.5 x 220 shaft they stopped making it hence the search for the elusive long shafted 5.5

251362513725138

Bad news. I am starting to get complaints from my people that the Head is stripping, contacted the the distributor and he is awaiting reply from Manufacturer.

Thanks for reply's I will try one more time to find short then escalate call. Will let you know what I find. Thanks again.

Been using for a couple of Month's now and I LIKE IT!:cool:

Good day
I have a 2100 in shop that is blowing fuse 101 on power supply I traced it back to connector 2 on main Bd but lost PS all together before I could locate short. There is only one 24v load...

Not sure if they do Xerox but have used Polek & Polek in NJ with some success on aftermarket items.. I prefer OEM but we all do what we gotta do..:rolleyes:

Samples would be helpful. Ghost always makes me think of Fuser, but strange color line makes me think of ITB cleaning unit.

Ditto here. Would be interested when you got around to Ricoh Touch screens.:cool:

There is a Pin switch on rear of Duplex fallen out or broken

I have long sought after a 5.5 mm nut driver with long handle, since suppliers like Ames and Crawford stopped carrying them. I have found one at Polek and Plolek. It is not same design as German made...

I have customer who wants HDD Formated on Bizhub c352 before leaves office as we are not Minolta dealer I do not have that info, don't want to buy Manuel for machine because it is just going back to...

I do not work on this Model, however it sounds like a flakey Developer Bias conector or HVT. I had similar problem background with Yellow, on E4520 and it was loose conector for Bias on HVT.

:confused: I seam to remeber something about this code, it is color unit drive code. Nothing on web sight, however something is tickling my memory about this. Any hits on this problem. I think the...

Thanks for the suggestion guys tried both. After much head scratching and quite a few parts. It turned out to LGC and SYSRAM. Also made CQ much better. The system asic and logic asic must...

You also might want to do continuity check between drum shaft and frame. the drum ground in that frame are really flakey

Believe it not there are 4 Mylar paddles in hopper that come off and cause both dirty machine and overtoning. Only way to find out is to get your Hands dirty and take hopper apart, but if it has been...

I have two seperate 453 with normal copy proccess fair to good, however internal print (Meter reading, 9 start printout) are Blank or Black prints, replaced SYS and SYS RAM with no success. Both...

I have had this problem several times. There is a TSB on this problem. There are Spacers that mount on Transport Bed increasing space between Drum and transport. It does not always work, also might...

what is your Vt and Vtref values for yellow when overtoned, and running normal. It sounds like your TDC for yellow is crapped out.

This thread reminds me of two Bonehead customers. First one had Developer, which overzealous supply salesmen sold him sitting in his closet, he figured it was about tome copier needed it. So he...

There are 2 reasons causing that. Either Belt is loose, or more than likeley it is Black Mylar's in End Fence is kinked or has tear in it

I had one give me really skrewy problems. Turned out to be loose drum shaft, Transfer belt was driving drum so it worked sometimes but most of the time gave a host of CQ problems. There is a tech...

I have many times had to replace Developer drive gear, frame side of copier, for this problem. Have also had my guys miss problem, shaft side of gear gets rounded out.