Check the network board connector on the controller. Moving the machine if the cable is connected may damage the bent or unsoldered pin connector on the board. It happened to me more than once in...
Type: Posts; User: Guticopy
Check the network board connector on the controller. Moving the machine if the cable is connected may damage the bent or unsoldered pin connector on the board. It happened to me more than once in...
No one will respond. There will be a new thread.
Greetings to all.
Microsoft and its security adjustment policies have annoyed us again with the SMB scan, with its latest update in January on Windows 7.
All equipment as they update will stop...
Thanks for the info.
Problem solved. Indeed the blockade was caused by the lack of updating of one of the modules, specifically OpePpanel.
Updating all the modules except this, caused the problem...
Hi everyone
In MP 301, after updating all the firmware: network, scanner, systen copy, engine ... etc I can not change the IP of the machine from the panel: User Tools / System Settings / Interface...
Can you send it to pepe.toloveo@gmail.com please?
Thanks
Everything is original, also the toner.
I will first try to change the paper type settings as indicated.
Thank you
Thanks for the reply.
I will try tomorrow to apply it.
The drums are fine, it only occurs to me that they may have excess toner.
The problem is clearly related to the fuser group, if a copy is made and then the fuser group is removed it looks like the...
Hello everyone.
MP C3503 with 206,000 copies and replaced the heat sleeve for being scratched.
The problem is that both the new sleeve and the previous one do not fix the toner well in the...