Sounds like the actuator at the DF entrance is sticking. I have seen them get bent and not move freely. Or the actuator will come out of its holders under the top cover.
Hope this helps.
Darren
Type: Posts; User: Darren King
Sounds like the actuator at the DF entrance is sticking. I have seen them get bent and not move freely. Or the actuator will come out of its holders under the top cover.
Hope this helps.
Darren
Sounds like you are not logged into the laptop as an administrator.
Does anyone know how to reset the Pagescope admin password? It doesn't explain the procedure in the manual. I have a couple of these units in the field that I can't get into admin mode. It is very...
Go into service mode under "image process adjust" and make sure "grad/dev AC bias V selection" is off.
Hope this helps.
Darren
The BH363 is definitely a faster printer than the BH350. No question!
If the paper is running SEF "short edge first" and the image is drifting it likely needs "Org. Width Detect Adjust" performed in service mode.
If paper is running LEF "long edge first" then it is...
The the optimal value is 8 plus or minus 2
It is time for the youths to rise up against the opression of copiers everywhere. Take up you No. 2 phillips screwdriver and your spring hook and face the darkness with honour.
[QUOTE=fixthecopier;365855]Thiese are some interesting thoughts on the subject...5 Insane Theories About Why We Haven't Discovered Alien Life | Cracked.com
this is my favorite...
According to...
"Contains many ink" Oh boy, sounds really bad. The last laser copier that contained many ink we had to take it out back and put it down.
I don't understand KonMin's obsession with making the tech go on a cover removing adventure just to get the one cover you are trying to remove, off. It turns a one minute job into hour of cursing...
What is the weight of the stock? Have you tried cleaning the bypass feed roller, or the registration roller? Where are the jams occuring?
These machines are really not meant to be used as production...
Maybe try having them print to user box instead of secure print.
Have you performed the PH skew adjustment?
When the registration sensor is actuated it tells the resistration clutch to fire. Have to checked, or replaced that sensor?
I replaced the fuser cover on a KonMin C250 and didn't order the antistatic brush. The paper would exit the fuser and float up and stick to the bottom of the scanner bed. It was the funniest thing to...
On the right side of the machine remove the lower jam access door, remove the small cover beside the door(two screws). Unplug the connector. Open second tray. Remove four screws on paper feed...
What have you tried to solve it?
Does the fuser turn with the green knob?
Is one of the bearings seized?
It could be the motor, but, you will have to troubleshoot it.
Hope this helps.
Darren
Have you opened the front door and watched the paper to see what it is doing? Have you removed the drum claw assembly to check for toner in the solenoid, it will slow down the drum claws and allow...
All day out of the office, able to fix everything (doesn't always happen. lol), and got a message from someone that made me smile. It was a very good day.
Don't do it. It's a trap. lol
Wow!! You can step down off your soap box. It isn't needed here. No need to turn this into a personal thing.
The question I have is, why take them out in the first place? Was he trying to get his head into a tight spot and removing his teeth made his head smaller?
Married in 1987 split in 2002, still friends. Lived with a woman for 5 years, she broke my heart and took away her six year old daughter I had helped raise, haven't seen her since 2008. Been looking...
There seem to be a lot of people on here with ex's, me included (still single, so sad. lol). Is it a hazard of the job, or just a coincidence?
Kinda makes you wonder.