So basicly you have changed pretty much everything - the fuser,sensor and the board if i get it right?
The only thing that remains the same is the cable harness - i would check and trace the...
Type: Posts; User: voodorush
So basicly you have changed pretty much everything - the fuser,sensor and the board if i get it right?
The only thing that remains the same is the cable harness - i would check and trace the...
Sounds like a bad or disconnected PTC thermistor and i will asime they use PTC thermistors (I would put PTC instead of NTC if the upper margin is critical).
I dont get it...
What kind of networks? Both are using NAT and they are on different network layer without physical connection?
Basicly you dont need 2 network interfaces - i'm surpised there are...
Hi,
I have here old (but low on working hours) AR-C260M MFD. I have spend some hours to calibrate everything including mechanics and the unit is working fine now even at 300gr/m2 heavy paper....
Hi,
I have here old (but low on working hours) AR-C260M MFD. I have spend some hours to calibrate everything including mechanics and the unit is working fine now even at 300gr/m2 heavy paper....