Search:

We had this problem once or twice. If I remember correctly it is indeed a problem with the fax line. Not an analog line but a digital one.

Here in Belgium there are no tech bulletins available regarding the belt, I just checked the sharpone website to check. Is it possible to send de 2-3 bulletins regarding this.

Thanks in advance!

Hello,

Does anybody know how to perform an emergency firmware update on a Sharp MXB427W?
We have one that gives a kernel error. We cannot connect to the webpage or go to the menu on the printer...

Switch 55-3 bit 2 is for toner MIB report 5%

Check if the Discharge Led after the black drum isn't dirty and pulling black DEV.

This may also help:

SIM55-01 SWITCH9 BIT8 set on:1 Set Maintenance Cycle to prints instead of revolutions/turns

if MFA is enabled on the email that the printer will be using, then you need to make a "app password" and use that password in the printer.

Manage app passwords for two-step verification

PPD driver didn't do the trick. Going to try the sharpdesk mobile option

Hello,

We have problems with some clients that are working on devices with an ARM processor (such as the Microsoft surface Pro).
The drivers won't install, the printer isn't showing up in the...

Normally it is the KB500082 update that causes problems.
If you install the KB5001649 the problem should be solved in most cases.
If not fixed remove KB500082 and run "wushowhide.diagcab" (just...

You can also do the necessary settings and then save it as a favorite on the device. This way if they select the favorite all the settings are good.
This is very handy if they have to do a lot of...

Our supplier doesn't deliver MX607HB's anymore. From now on only MX601HB. So if you stock only the MX601HB for this series you will be fine.

The fuser cleaning mode definitely helps. What also helps is going to simulation 43-1 and put the "plain pap&wup&rdy GR" on -5

That is what I did, the watermark is set in the printing defaults. But the watermark doesn't push out. (same thing if you use autentication, this preference is also not pushed)

Hello,

We have a client with more than 100 computers. We installed multiple printdrivers for this machine on the domain controller (Windows Server 2012) with different preferences.
One of the...

There is a tool from Sharp to rotate the dev roller true the gears, so you don't have to use you're finger. It is very handy.
It is called the "DV HANDLE" and the parts code is "UKOG-0341FCZZ"

...