Good day! My tech partners and I habe not found any pattern to this issue. I have replaced a AK Unit. We have replaced the right conveying door. I got one going with reseating YC- 25 & YC 30 on the...
Type: Posts; User: TonerEater
Good day! My tech partners and I habe not found any pattern to this issue. I have replaced a AK Unit. We have replaced the right conveying door. I got one going with reseating YC- 25 & YC 30 on the...
Ok. I will post what Tech support says and keep you informed. Have a great day!
Good day! I replaced the Exit Unit,but no change. I swapped the AK-7110 with a new one. Checked the connections. Ran switch and motor tests in Maintenance Modes.No change.I had another tech working...
Greetings! Thank you for posting this issue. We have 3 devices now that are having the same J500x codes with AK-7110, even on XX53ci units. P
aper stops partway into the AK. We have replaced the...
Thank you for your replies. BSM2, I would say the router was changed,so I will have to get the settings back. The customer states that their smartphones were printing before this happened....
Greetings! I have a Kyocera 3551 ci in an office with a wired network and a different wireless network. For some reason, the third octect in the Wired network changed from 0 to 1,so no communication...
This is the craziest thing I ever heard of. But it worked. I changed the Humidity from Normal to High for Plain. Ran many duplexed prints with no further jams.Way cool,brother!
Greetings fellow techs... I went to sanitize the machine,and once I found the Sanitization touch key under System Menu Network, the key is grayed out, which tells me I can't sanitize the machine. Is...
When any error is followed by "due to a failure", I would try u906 Partial Control. Reboot machine. If error appears again, make duplex copies on the platen. Then use the Document Processor. If it...
Greetings all! Just a hello. I've been a tech since 1989. I appreciate this forum and hope to add valuable information as we trudge along!