Hey all- Anyone know if its possible to print the meter sheet from one of these machines? I just had 40 come off lease and would like to keep the sheets with the other pertinent paperwork. Thanks
Type: Posts; User: Toefur
Hey all- Anyone know if its possible to print the meter sheet from one of these machines? I just had 40 come off lease and would like to keep the sheets with the other pertinent paperwork. Thanks
Does not look like you can get just the glass. Its not listed as a separate item in the parts manual. Only the entire flatbed. The flatbed p/n is 41X0263 and is listed at 349$
Hello. My dealership used to be a KM dealer. We no longer are and we've been cut off from the KM web site. Cant get parts manuals, service manuals or anything. However we need to still support the...
Hey. I got a 1030 that spits out a confirmation report everytime a scan is sent to a desktop. Ive looked through the knowledge base and come up with nothing. Ive also spent an hour and a half...
It was indeed a broken drive gear on the primary transfer belt. I had two go in one week. Thanks guys!
Been having an issue with registration on 2 different 6200's. I bring them into spec using the adjustments in sim 50 and after the machine calibrates itself they are off again. I tried the auto...
Thanks, Im looking all the docs over right now. So far, Ive replaced all the associated parts (minus the driver board) with discharge section.
Wazza, Ill take those bulletins. My finisher is a FNX6...but, Im sure it has something to do with the stapler. My email is jhagon@centralcopiers.com
Thanks man.
Watching this thread as I have a finisher doing the same exact thing.
Got a K350 that has no transfer voltage. Image is nice and dense on the drum....copies/prints come out blank. Just was wondering if anyone has seen this issue. We have a bunch of these machines in...
Hello, Ive got a new install MX-4100 thats prints/copies at the rate of 16 per minute black and white. We timed it with a stopwatch. Its got a saddle stitch finisher on it. Ive looked on Sharps IDNC...
Hello guys/gals. I have a Panafax UF-8000 displaying a E04-01 fuser error. We have replaced the fusing unit but cant seem to figure out how to reset the code. Im looking through the manual and dont...
Haha yea right...I told our sales team about this post and the skewing issue and all they did was laugh. We have 2-3 of these machines in our warehouse that are going out in the field in a few days.
Has anyone benn able to resolve these skewing issues? I have 3 of these machines out there skewing. Lexmark has a bulletin posted on thier site but, the part #'s they provide are "discontinued"
Solution ID TAUS0656158EN* Solution Usage 5
Description
Intermittent C2557.
Solution
CAUSE: The serial number input for the machine is incorrect.
SOLUTION: Input the correct machine...
I had the same problem. I had to replace the MCU PWB to get it to work. Also..look at the top right corner of the MCW PWB and make sure that the 2pin connector is pugged in. Its the only 2 pin...
hold the copy count button down-----> enter 9272------> hit start----->prosper
look on the Sharp IDNC site and check bulletin TT-20119 This is a known issue.
http://www.sharp-idncservice.com/Home/Passthroughs/SharpStartLogin/tabid/159/Default.aspx
I got a 311 that completly locks up out of powersave mode. The screen and buttons are unresponsive but, turning the power off and on brings it back. Any suggestions other than disableing the mode?
hey all. I replaced the RAM in the machine and I still had the problem. I called and opened a ticket with sharp and they recommened that I replace the the VR sensor and ahrness in the ADF. So far, it...
Hey all. The image rides off the lead edge and rear frame. I just spoke with Ken Hill our RSO and he said that he has heard of this happening accross the US and that replacing the machine memory has...
Hey all, I got a MX-850 that randomly will shift the image on the copy. It will do this on the entire job...almost like the start of scan is off but,it will not do it scanning to the PC's. Ive...
alright...PH it is...just another lovely day being a KM tech...(sigh)
Thanks 8050. I replaced the black I/U already and have reseated all I/U's as well. I looked on Minolta's SSD site for the P14. Nothing there except what you said...replace the I/U.
Ive tried just about everything...aside from replacing the print heads. Any suggestions before I get manufacturer support?