I've seen that. ;););)
Type: Posts; User: Boogotshot
I've seen that. ;););)
I'm in Ontario at the moment. The Chevron this morning had gas at $6.50 :mad:
Can't wait to get back Atlanta and pay $4.50 for gas again. I can't believe I just said that.
If you have a Xerox PWS it will not uninstall IE 11.
$6.50 a gallon this morning in California
This is being done because IE is set to die in June. Eureka is reliant on internet explorer. If you have a PWS your edocs will continue to work however.
I use Depot international or TSA worldwide. They should be able to help you.
Did You go into 08 Mode and initialize the firmware? Code 9030.
Help! I have an EStudio 527 copier that jams in the rear section of the machine. It only jams when the customer is getting fax confirmations which makes no sense to me. I have upgraded the firmware...
Just wanted to know if any of you are using the N-Able software for your managed services customers and what are your thoughts on the software and how friendly it is. I downloaded the trial and have...
Sounds like a sensor is flaking out, have you tried doing input/output checks on the machine? Toshiba should show you approximately which sensor it is in most cases.
Same firmware, same toner, same developer, same copier, different speeds. :o
If the Z drive is a separate server you may have to provide the login credentials for that server. UNC path should read something like \\Server name\folder
Try the simple stuff first, have you tried replacing the network cable? Try setting the network speed to 10/100 and make sure the machine is on a static IP address. Sometimes it is the dumbest stuff...
When I first became a field tech, my service manager had me doing nothing but PM's and parts calls on machines for about 6 months. I learned a lot about the machines during that time. A network...
Just a few thoughts for you to consider:
1. Have them check to see if there is a default file size limitation on the SMTP server this could be the problem.
2. Check your resolution on the files, it...
I have an MPC4000 that switches between trays 2 and 3 and rotates every sheet of paper only when printing from the pc. In a five page document it will send out page one from tray two and page two...
also check to see if the RAM memory is installed in both the page memory and main memory slots. If there is no memory in the machine it will just sit there at the splash screen.
Silly question but is the phone line is plugged into "LINE" and not the "TEL" jack?
Also make sure it is genuine Toshiba toner. If it is toshiba compatible toner it may not function properly.
Good move.
Already replaced the drum and drum blade. Still getting the jitter. I am going to replace the developer spacing guide rollers next. I think the spacing isn't correct and may be causing the jittering....
Did the PM on the machine. Now has a bad drum jitter and vibration. Did not have it before the PM. Removed the drum unit, and ran in 03 mode. No noise. Ran with Developer unit in 03 mode, no noise....
Part number for the exit sensors is 4401983230 (SZ-LG248L1) these are the new and improved exit sensors that seem to work better.
Speaks the truth he does
http://img.photobucket.com/albums/v628/Raevyyn/yoda1.jpg
Speaks the truth he does
http://img.photobucket.com/albums/v628/Raevyyn/yoda1.jpg