No the drum drive is brand new. and the dev unit also.
this lines i think are from the movement of the transfer unit somehow.
if you use thick 1 paper mode. the lines are improved drastically.
Type: Posts; User: Canonier
No the drum drive is brand new. and the dev unit also.
this lines i think are from the movement of the transfer unit somehow.
if you use thick 1 paper mode. the lines are improved drastically.
No, only in black.
the carton paper effect
(the lines in gray).
Sorry for the delay in my answer.
i am attaching a scan of the problem.
the machine has new K unit (both dev and drum.) the transfer unit is relatively new (70.000 prints)
and this happened. a...
Sorry for the delay in my answer.
i am attaching a scan of the problem.
the machine has new K unit (both dev and drum.) the transfer unit is relatively new (70.000 prints)
and this happened. a...
no unfortunately is not.
i am trying to adjust the rotation speed of the transfer unit because of the classic grey lines on copies.
it is done by adjusting a dp switch...
Hello all
im trying to find the DP switch list for bizhub c452
anyone has it ?
Thank you!!
update.
i removed the black drum and cleaned from the outside the miror locatet inside the drum not perfeclty because it has a very small gap to the side and i used a small tab to reach it.
the...
cleaned the laser glass again
run 250 more prints (b/w)
and this is the result.
(see image)35230
ok tryied that the problem is less visible but still there.
the unit is brand new ( 500 a4 prints)
i cleaned the glass from the inside (removed the unit to do it better) but nothing...
any other ideas ? maybe a faulty developer unit?
what do you mean clean the print head ?
Hello everyone. after changing an black drum and developer unit in KM c452 and printed a sample page (a3) the page is printed with a fade stip almost in the center. this happens only on black color ...
hello all i have a strange problem with a KM c7000 P
when i print photos the photo is printen with visible squares like compresion only in white ang grey colors.
it appears like squears in...
I make a new post about this strange problem i am dealing with a clc 1000
This is the explanation that the book gives for E061-122 .
I cannot figure out the way to check the source of the...
also the machine is quite new only 140000 prints i think that the problen is not the laser but i cant find a way to check if the laser works
a friend techisian told me that is the laser unit damaged!!!! is this possible and how can i check it ? The wires and grid are fine and new!
The copier was working ok and suddenly the error code came on screen.
I cleaned all the yellow related parts drum, salt sensor ..... but nothing happend.
The error code comes when i try to print...
I found the solution. The problem was that the black toner was very rich (tow much toner) i unpluged the toner feed sensor and made 30 A3 copies solid black
The density of the black started...
Hi my friend
I did as you said. I run a seperate init in the starters, all work fine except the Yellow it gives a E20 190 code. The Strange is that i replaced the salt sensor ( i had a spare one)...
Hi all
After replacing all the drums and starter for all colours the machine has a strange behaviour. When it prints a page the page is printed "dirty" with a yellow and black "powder" on it. ...
the copier was already calibrated the problem occured after a reboot on the v80
the thing that i did as a final solution was to change the slot position of the video controler on the v80 from slot 1...
A mIRACLE!!!! SOMEHOW the Rip came back to normal... (for now) thanks for your time my friend
Thanks again ...
all the test pages, conf pages, test prints even the colorcharts print with a cyan background and all the colours on the page print with cyan overprint
I Formated and recalibrated the colours and...
a Video card is instaled in the v80 i pulled it out and reistalled it again
The cable is tightened very well
i think thas something is damaged in the mainboard of the v80
The strange is that it...