Search:

what do you mean? i have a xerox 5225 with a empty XER106R01306. Next installed a compatible toner and gave error. Now just put a new original XER106R01306 toner and it gives error.

if i put the...

hello. This problem was already when we received the printer. Possibly was when at another repair shop they repaired the printer and assembly it wrong.

hello people. Soooo... the problem was... a fan upside down.. We got a printer from another client and we compared it, saw the fan the other way around.:confused::eek:

Some many problems and no...

hello people. once again on this thread, lol..

i´ve replaced the toners for originals but the drums are very expensive and not quite sure if this will solve the problem.

it doesn´t seems that...

hello. that´s what i thought. thank you for help. regards

Hello, people. I´ve got a Ricoh Sp4510 for exchange the pickup (M1602830) and separation pad (M1602620) but cannot find stock. Do you know the equivalent ref´s from kyocera, if any? thank you and...

hello
where you able to fix that printer and do you know if it is still working? i´m stuck with the same problem.

hello. i was thinking. these toners have no contact board with printer. they just have the toner powder inside. It a no question regarding OEM or compatible. Do you understand me?

does any soul...

No problem ;) . thank you for help, anyway.

Hello

just answered above.

thank you for help

hello. know it´s old but did you made it to find what was the problem?

regards

hello, people.

I´ve got a Brother mfc-9140cdw that has the overheating problem. The machine prints 1 or 2 sheets and then goes to overheating problem. 15 minutes waiting. i´ve been searching and...

hello people. just to let you know that after replace of Rollers 302NM24010 , all is working ok. thank all you for help ;)

yes, i´ve just replaced those three... it jams above that. :)

hey guys

ok the machine has 207k prints. I´ve replaced the pickup rollers but it seems to be the two rollers above (kyocera 302NM24010 and ricoh M2812834). The sheet gets stuck there. I´m trying...

thank you copier tech. that´s what i think. will try to replace rollers and see if i can find a way to reset or turn off message. :)

thank you for help but that a diferent model and those parts will not fit.

hello people.

i´ve got a Ricoh MP501spf that says (replace maintenance kit) but i cannot see any information on this kit, anywere.

I already got the pickup rollers kit to replace but i think...

Hi people. So the problem was the Paper pickup assembly. It seems that when a spring snaps inside this assembly, the gears go crazy and it is not possible to sincronize them in the correct order. but...

-------------------------------------------------------------------

Hello teckat

So, finally i managed to get other working machine. today i´ve tried the pickup board PCB and this is not the...

--------------------

Yes I can print from bypass tray. The Motor M1 is working. These plastics should be transparent...

When I simulate the insert of a tray by hand, the lifter works fine with...

---------------

Hey tekcat

Any ideas for this (no paper) message? I´m pulling my hair on this one, lol...

thanks

------------------------

Well, it shows this screen

39183

I do get a message saying (add paper) and the tray signals blink as I insert the paper trays. When I insert the paper trays, the...

----------------------

Hi. Yes i´ve read it all and have put all the gears in place but the lifter continues to not operate. The lifter arm claws and ratchet gear they seem all ok. No broken...

-------

Ok, just saw and the whole unit is super expensive. I´ll open it again and try to see what´s wrong inside it. The spring mounts look all ok. really weird...