Search:

hi, unfortunately apple got rid of appletalk in 10.6. the only way to use a SC7700 rip is to know the IP address of your SC7700 (you can set up an IP address in OS9/Windows using the console program)...

i'm controlling 2 sc7700's from 10.6 (snow leopard) In 10.5 apple got rid of appletalk but you can add sc7700's using their ip in 10.6 as long as their ip address is in your network otherwise you...

well i guess it depends which rip and which riso you have... if you have an sc7700 and a gr3770 you will need the
SC7700 GR 600 dpi V1.0A
file
use your common sense i guess, i presume the J...

i think you have to leave printed pages for longer, i sometimes leave prints for more than a week before attempting a second colour (depending on positioning) a cartridge type paper (or book type...

this is a common problem especially when a block of ink sits underneath the feed rollers, you could try different paper stock (more absorbant), print on larger paper so the feed rollers sit on...

The riso console program for older windows os will work with XP
you can get a PPD driver file for use in both XP and OSX (i use it in 10.6) - the console program for mac will only work in OS9
get...

Yes I guess a badly seated ram module could have been part of the problem, this has happened before on another unit, though I seem to remember that the SC7700 makes a continuous beep when you turn it...

Just a quick update for anyone who might find it interesting or useful!

After cloning the hard drive (the SC7700 runs Linux, has a LILO bootloader and a bunch of FAT16 partitions) inside the...

personally i would use Riso branded ink and not 3rd party stuff.. in my opinion it's much better quality and the viscosity of the ink is much better.
i have tried 3rd part ink before but ran into...

would be interested but i'm in UK let me know what you want for it
mark

hi, one of my sc7700 units died on me yesterday, the 3 lights stayed on and unit wouldn't switch off, though i had been using it throughout the day. i swapped out various componants, ie ram,...

you press the master/print and line/photo buttons as you turn the machine on to enter test mode.

you can get a ppd (printer driver) for sc7700 from :
Index of /pub/ppd_adobe/SofHa
the sc7700 should appear when you add a printer in osx (ip printer if you know the ip add or appletalk)
then just...

they can, i use regular GR A3 drums on my 3770
but according to GR tech bulletin 83

....New type of "Clamp Plate Base Ass'y" is installed on a new GR A3 Color Drum. When you install present GR...

another option, especially if there is dried ink on the inside of the drum, is to stick a bit of diesel or kerosene in the end of an ink tube and stick in the machine. should disolve the hardened ink...

the SC7700 cable looks like a standard DB37 printer cable on one end and riso chopped the other end off and stuck a 36pin 'scsi style' plug on the other.. if anyone knows what these connectors are...

personally i would forget about the CI300 if i were you.. painfully painfully slow and not even sure it will work with FR (could be wrong though - RA definately cos i used to have one!)
only ever...

rip will definately work under XP and mac os X, and probably vista too
i have sc7700 unit printing via osX with the console program running under XP -- drivers are available online (ppd's and a...

does anyone in the uk have a Riso SC7700 rip with cable that they want to get rid of!
thanks in advance.

i did the tests for the separator fan (the one above the separator arm!) and suction fan..
the separator fan (the one above the actual separator) was fine but the suction fan under the transport...

unfortunatly the job i was pulling my hair out about has dense dark borders on both sides! i got around it (with only a few marks) was by printing the pages as A4 on an A3 sheet, but this is not...

you're right it would be to let the print dry a little more before the next one is laid on top, especially when printing dense blocks of colour.. we often have a problem with slight smudging on the...

if you pm me your email address i can send you risorinc3 drivers for RN/RP - seems like there are win98 and win2000/XP versions.

another request!

i know that some early Risograph GR3770 had an option similar to ricoh copyprinters that let you print then rotate the drum without pulling through paper etc..
i know riso had to...

i'm hoping someone has a solution for this problem.

basically the separator is leaving a mark on prints when there is a dense block of ink in the centre of the page (esp on A3)..
i've adjusted...