Search:

Type: Posts; User: Santander

Page 1 of 20 1 2 3 4

Search: Search took 0.05 seconds.

  1. Replies
    3
    Views
    1,069

    Re: DF-790 with 6210 jam code

    Replacing the Swing gate is a good start, but also replace the red torque limiter. We have seen this cause the problem a number of times on 40+ mailboxes we have out there.
  2. Replies
    8
    Views
    964

    [Misc] Re: Taskafla 2335

    Most likely you have a broken pivot point on the backside of the original lift plate. The feeder will cycle through trying to feed an original and error out with misfeed.
  3. Replies
    8
    Views
    871

    Re: 4002i - large void area

    Is the secondary transfer roller making full contact with the drum? There is a spring on each side to press the transfer roller against the drum, if one is missing the roller only contacts part of...
  4. Replies
    13
    Views
    4,951

    Re: Kyocera SMB Scan Setup

    When a user uses the MS pin to log on to the OS, Windows goes out on the internet to MS to verify the pin number to the user, it is not authenticated by the local system. Setting up a local user...
  5. Re: "But faxing is the only thing hippa compliant" whine

    What about the Federal Court evidence train? Original, copy, fax, pdf, email. Wonder why they want to continue with fax? My fax trumps your email or pdf.
  6. Thread: F053

    by Santander
    Replies
    5
    Views
    850

    Re: F053

    When you attempted to upgrade the firmware were you using the Turbo package? If a firmware file has become corrupted and the Turbo upgrade is the same version that is in the machine the Turbo...
  7. Thread: 4002i

    by Santander
    Replies
    28
    Views
    3,338

    Re: 4002i

    First thing I would do is make sure all the DV settings in the sims mode are set to factory defaults. If someone has played around with the settings it could create havoc. And now from far left...
  8. Replies
    10
    Views
    1,771

    Re: M3655idn Intermitant Send error 1102 on SMB

    Agree with Ropariva, you may have a DNS issue. You said they update the domain controller, are they using static IP addresses? I have seen cases where they set a static IP for the machine but fail...
  9. Replies
    4
    Views
    1,437

    [Error Code] Re: Kyocera TA-307 code F4F6

    Your English is fine, not to worry. The KPDL driver is a postscript driver and even set to auto I have seen it have problems with text documents. The better setting is to use the KX driver which...
  10. Re: Kyocera M2040dn SUPER slow and scanning to usb issues

    Glad it is back to normal! The only way you determine what as changed by the reset is if you had printed out all the reports, Sim00 all, before the reset and after. Without that there is no way of...
  11. Replies
    4
    Views
    777

    [Error Code] Re: Kyocera TASKALFA 520 I

    Patrickjlc hit on one of the probable causes, the black mylar on the transport assembly cracks causing a delay or inability to feed the paper. Also check to make sure that one of the pressure nibs...
  12. Thread: M3645idn

    by Santander
    Replies
    26
    Views
    5,255

    Re: M3645idn

    You are correct in that with a fax waiting to print the unit will not allow you to delete it or get into the service mode. Power down the unit and un-install the fax card on the right side of the...
  13. Replies
    9
    Views
    1,919

    Re: TA 3500 j0512

    The codes you provided indicate the machine is detecting multiple sheets being fed from the cassettes, the only difference in the codes is which cassette it is feeding from. Check the retard roller...
  14. Replies
    14
    Views
    1,802

    Re: Background on prints

    Since you did not indicate the model this is occurring on giving a definitive answer is hard. Since it only happens in the morning, it would seem to be a moisture problem as Blackcat said. Are the...
  15. Re: 4550ci won't email all of a sudden, 1102 error

    When MS changed to restricting devices to TLS1.2 they got a lot of push back. They subsequently created a legacy endpoint to allow the older equipment to work with 365. Their IT people will have to...
  16. Replies
    6
    Views
    1,012

    [Misc] Re: Kyocera M2540 connectivity

    Did you print out a status page and verify that the current IP address of the machine is the same as what the print driver is using? We never setup a print driver to use the IP address, but use the...
  17. Replies
    8
    Views
    857

    Re: kyocera 3500i hazy line

    Did you check the paper dust wiper for the registration roller? Have had cases where the paper dust creates a string and interferes with the developer and then breaks off and the copies are fine. ...
  18. Replies
    40
    Views
    4,803

    Re: Kyocera 3645 not grabbing an IP address.

    Is the router/switch port going bad where you tried to plug the 3645 in? Quick test would be to take a small 4 port switch with you and plug the cable from the wall into the switch and then plug the...
  19. Re: Kyocera FS-C8525 transfer belt unit TR-896A issues

    Before changing the transfer belt assembly you need to replace the transfer pipe cleaning assembly, a noted problem on this and other units. The shaft spinning in the drive gear as you described is...
  20. Replies
    4
    Views
    4,924

    [Misc] Re: 5052ci scan error 3102 O365

    Is there any other information when the code is displayed, as 3102 is not listed in the service manual. Since it is intermittent, I would suspect that the connection with the server is timing out. ...
  21. Re: Copy Star CS-6002 and Taskalfa 4500 No Longer Scanning O365

    We switched over a customer to the legacy server on O365 last month and left instructions for the customer's IT people to log in to O365 and set the legacy TLS to true. They didn't do it. Today they...
  22. Replies
    2
    Views
    762

    Re: Kyocera M2040 - 3155dn

    Check your parts manuals, totally different animal.
  23. Replies
    9
    Views
    1,050

    Re: Merry Christmas

    Merry Christmas to all. May the spirit of the season last through out the coming year!
  24. Replies
    9
    Views
    1,227

    Re: Ecosys p2040dw / dk 1150

    From your example you may have a fuser problem not a drum problem especially since you state that it occurs on larger print jobs. As the fuser heats up the sliding sheets for the fuser film maybe...
  25. Replies
    2
    Views
    1,010

    Re: Kyocera FS 6525 C0480 error

    You fail to mention if this unit is in a domain or network. If the unit is running on a network/domain, if the machine clock is more than five minutes off the network/domain time you could get this...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4