In need of the latest firmware for the C280. Any help would be appreciated. My email is zachr3580@outlook.com
Thanks.
Type: Posts; User: 173545
In need of the latest firmware for the C280. Any help would be appreciated. My email is zachr3580@outlook.com
Thanks.
Have you tried this method, leaving the entry blank?
Subject Registration
1 In the Network Setting screen, touch [Scanner Settings].
2 Touch [Subject Registration].
3 Touch the number of the...
I found this helpful.
Solution ID TAUS0638997EN00 Solution Usage 0
Description
N-15 code and various other N codes when scanning to E-mail, using PDF* format, after five (5) pages or more. E-mail is received as a data...
Looks like the drum and/or cleaning blade needs replacing.
Toner supply motor abnormality.
Description
How to set the ScanAutoDelete time of document stored to a box.
Solution
To set the ScanAutoDelete time, perform the following:
1. Press the Help Key and then select KEYOPE mode.
2....
Replace PWB-A
Apparently the only way to fix this is to turn off sorting as the default setting:
Subject:
When an original is scanned from the original glass, the machine prompts the user to...
Scanner device control system failure
0x00dc0000to 0x00dfffff
MFB3 Board, Scanner Home Position Sensor. BCR board
PN for switch is 40AA85010. Number given earlier is the actuator.
I agree with redhotrob. Level 70 firmware solved this several times for me.
The duplexer is an optional item. Does it have a drawer labeled ADU? If so, it may be disconnected. Remove lower rear cover to check wiring.
Possibly a clogged toner supply unit.
MS1 (front door interlock) relays 24v to HV1(charge), HV2(T&S) M10 (toner motor), PRDB, M4 (drum motor), M1, and M3 (developer drive motor).
I've replaced or cleaned dozens for copy quality issues...
I have seen a bad front door switch cause this. It's a weak spot on this model.