Thanks & I was told the ram could be bad. I have a board pert # A00J H020 ( from a C550?). The board in our 650, has # H021. Are they interchangeable? Thanks for the info.
Type: Posts; User: keystonenew
Thanks & I was told the ram could be bad. I have a board pert # A00J H020 ( from a C550?). The board in our 650, has # H021. Are they interchangeable? Thanks for the info.
When replacing a fuser unit, the touchscreen wouldn't come up & is stuck on the hourglass image.Our tech tried to update the firmware with the KM flash card, but it wouldn't work download.Tried power...
Just got a new belt & lowered the side door, took out the fuser unit. So now how do I get
the belt out? Thanks...
How do I go about adjusting the fuser speed when in service mode?
I'm not a tech & tried to do this in service mode, but can't seem to find out how. Copier has very few clicks on it.
Our C650 w/ no fiery, is printing with too much magenta. I go into the tech mode &
tried to make some adjustments, but to no avail. Can anyone tell me how to adjust
the colors if its possible...
I've heard you can print enelopes on the C650, but think a 5.75" w x 4.375" h,
is too small to feed thru the machine? Can I feed w/ the flap on the side? That
way, it fits in the size parameters....
When I try the drum peculiarity adjustment in service mode on our C5500, it throws
a code of 2813. Any help is greatly appreciated!
To get our C5500 back on contract, we have to get it in good working condition first. We need
a 200 K pm kit, new oem developer units, drums, transfer belt, etc.
Please call 775-323-7716 & ask for...
Does anyone have a high voltage detector assy board, Part # A03UR73600?
Its for our Ikon Business Pro 550C (same as konica minolta 5500C).
Please PM me or my email is buzzg.keystone@sbcglobal.net.
I got the c2813 code to go away by cleaning the sensor, but I'm getting cyan streaks
across the width of the page & look like roller marks. I see the cyan imaging unit flexible
blade is touching...
Tried two used ones & still throws 2813 code...
I switched it out & it threw a new code C-2703...
I had some used ones lying around & tried replacing it w/ one of them earlier, but didn't help.
I'll try another one & see if that will work. Thanks for the help & I'll post the results....
Thanks much & being a novice, what does the charge assy look like? I don't know if I have
an extra one lying around, but will check. Also, is it easy to replace?
Our Ikon Biz Pro 550C, threw a code c-2813 & I cleaned the cyan drum sensor & it worked for a day.
Threw the code again & I cleaned it again, but to no avail. I'm a novice & not a tech & we're...
Got my answer & they will not interchange. Oh well, now will have to find a 550 beltsince we're off maintenance.
The magnetic timing tap came unglued on our 550c belt. I have a new C500 belt & wonder if it will work in the 550?
Thanks, buzz
Our C500 w/ 2 million clicks took a dive & our C650 w/ minimal clicks isn't cutting it & is too expensive to run for our print shop. So, we have a chance to get an almost new C550 w/ external Fiery...
When we go to print a job, we get a message "job is deleted due to insufficient memory" and "memory is full" message, too, on our bizhub C650. We've cleared the que & rebooted our computer & copier...
The white plastic gear on our fuser drive unit wore out from a defective fuser unit, we think & caused it to lock up & strip the white # A00J235500, plastic gear. We replaced the fuser unit & the...
Need a few spares for the white plastic Fuser drive gear # A00J235500. We pay $10 ea from Konica. If anyone has one or more to sell, please contact Buzz at Keystone Quality Printing. My email is ...
I'm out of black toner for my Bizhub C650 & can refill the cartridge w/ some C500 black toner I have on hand. Do you think the C500 black will work ok in the C650?
I sent you a PM about the FUser unit for a C650.
ALso, the KM tech said if the fuser unit shuts down, to replace the 63 milliamp pico fuse on the front. When the machine turns on & starts up, it sounds like a gear malfunction happens & it quits. ...