I will be sending an invoice to Microsoft regarding the Windows 10 updates that affect the connection between printers and multifunction units. (Windows updates installing WSD ports, over riding...
Type: Posts; User: pcs
I will be sending an invoice to Microsoft regarding the Windows 10 updates that affect the connection between printers and multifunction units. (Windows updates installing WSD ports, over riding...
It prints fine,
Copies from ADF are ok
Here is what I have done
Removed glass and cleaned bottom side and wiped down scanning unit
Still the same
every thing seems to be moving...
With Oki announcing their departure from the Americas by next March.
Who will be the next to go, merge or just get out of the business.
Back in the 90's there was a lot companies. It seems like...
Logical Maintenance Solutions, Inc. Called me out of the blue
Have any one contracted with these guys if so how is it going
Any info would be nice
Thanks
Check out a local motorcycle dealer they usually carry ramps that can handle heavy bikes.
You may have to modify them a little but it is a start.
Here is my story:
I should have received a delivery on Wednesday (12/02) according to their web page tracking system. When it did not show up by 6 pm, I called their service number (tracking phone...
I might be taking over the service on these units.
I have not worked on them before.
They both have approx. 260k page count
They both seem to be fine for now
I am going through the...
Looking for good reliable used / lease return equipment mostly Kyocera / Konica Minolta as that is what I service / sell. West cost company would be better as I would like to save as much on shipping...
I had the same issue with at 1128 you would clean the glass it would be ok for a few copies or a few days then back again. Just about ready to take it all apart when I notice some gray gunk on one of...
I have customer with a Dell 1720DN it’s been jamming when the paper in the tray gets below half.
What was done?
I replaced the paper feed rollers checked the tray set up all OK.
Still the...
I have a customer that is using DSL with a Magic Jack set up on a stand alone PC and they are having issue faxing some times it works but most of the time it does not.
I tried another phone cable...
I just bought a New Out Of Box Oki B4350 it came with Europe AC Cord Went through the setup Used a new universal power adapter (using the unit in the US) Pluged it in nothing happened. No lights No...
I have a customer with a used 5si, the customer can not afford the price of new parts they are low on cash. I am trying to find good reburb parts at a reasonable price, the try 1 pickup assembly and...
I have a customer interested in the Powis Foilfast p21x. They would like use media other then the Powis covers.
Dose any other media work with it and if so what?
thanks
A customer has an hp LJ p3005 with a delaminating fuser. I contacted HP and they will not do any thing about it because it is out of warranty (Just under 3 years old). They would transfer me too a...
I have a customer with a Konica Minolta magicolor4690MFP and the ozone fan comes on and goes off periodically, which it does when it is not being used. But from time to time the fan stays on and when...
I am looking for a person or company that I can purchase parts for a potential customer. They have not been able to get there units up and running because know one in the area can get parts for them....
Thanks for all of your input, it is a 7130 not a 7030 my bad.
It fixed itself. Don’t you just like it when it all comes together and makes you look like you are trying to rip someone off when all...
I have had other small units with this same issue and it was because of the one of the following.
Is it going through a USB hub? If so try connecting it direct.
Check to see if the USB port on the...
The unit has approx 194K on the clock and is about 10 years old.
The unit started out with toner at the top edge, bottom edge, from right edge to about 2 inches in, the left edge and some...
Have you tried up dating the firmware?
I know this works on other products with similar issues
In reply to B0256 (Can you access the Command Center) No go.
I was thinking it was the NIC card but it does not hurt to get a second and some time a third opinion
Thanks for all your help
Copystar CS-2550 Net working issue
Until this week the product has been working fine now it will not print over the network
(It copies fine)
Running windows XP and Vista not printing from any...
I am looking for reset chips for the imaging (drum) units for the Konica Minolta magicolor4650 / magicolor5570 or a reset device so I can do them myself. I have several customers with theses...
Has anyone had a chance to play around with the Kyocera FS 1128MFP?
Is there any issues with the unit and can it copy / scan legal on the flatbed?
How is the build quality?
Any info would be...