I am going to check 5v. It is lost
thanks for your help. 👍
Type: Posts; User: jvargas
I am going to check 5v. It is lost
thanks for your help. 👍
I am a technician. I change the power supply. And the copier is working again. But i need to know how to fixed it
Hi, I have a TOSHIBA STUDIO 856, Suddenly appear this message "CLOSE FRONT COVER'' , I changed the power supply and the copier is good. My question is somebody now Where is the problem in the power...
hi, i have a problem with TOSHIBA STUDIO 657, it show on the screen '' FRONT COVER OPEN''. A fuse of 15A in the power supplied was bad, i changed it but still the message. Thanks for your help.
I have a question, i try to install to system software in iradvance 6275, because de hdd was bad, i get the hdd from iradvance 4051, the hard disk is original, after 3 times to try to reload the...
i release the ribbon from the SYS PCB.
i disconect the fax system and still the light
Hello. I have a problem when i turned on the machine the green ligth of line of fax is turned on and never turn off and if you press the key SCAN a red ligth in front of the machine such as a jam...
sometimes this message is only for maintenance, you can clear it. Press 0-8 together and turn on the copier, enter TEST MODE, press 251 + start
you can płt the number of copies you can this alert...
Hi, i am looking for firmware toshiba studio 456 and 856, i have all the firmware for others models of toshiba and canon. If somebody need one of this, I could change it for this, thanks everybody.
Hello. I have problems with IU CYAN. The costumer buy a new one IU Cyan because the old IU was loosing developer.And change too the IU MAGENTA and IU YELLOW The IU BLACK have 30000 copies I put the...
thanks, i fixed the problem, i change the board that contains the memory dimm. the machine is ok now
Hi, i have a problem with this machine, only in front of the copier i can see a red blue and orange, together, and the star botton is orange, the customer was printing 20 copies in 12 X 18 special...
hi, sorry for my english, i am not write o speak very well
hi, i have a problem with studio 720, i had change the drum, the cleaning blade of drum, the developer, the transfer belt, and the cleaning...
[C260] Peak detection error
Does the exposure lamp light? (Perform the output check in the test mode: 03-267)
YES
1) Check if the connectors on the CCD and SLG boards are disconnected....
Peak detection error: Lighting of the exposure lamp
(white reference) is not detected when power is turned on Check the glass and the flex of the exposure lamp, or the lamp, maybe this help
other way is using a program that you can find in the cd utilities called download files. it more simple and you do not need an enable dongle for scan, you can download the files directly your...
hi, check that gear behind the machine maybe it woul be your problem, see the picture
I do not have the jigs, and I would like to know why this pcb sys are bads, i am working to find this jigs for intenet, thanks Emujo
Hi, i have a st720 begin in the morning every day staying with the logo of copier toshiba, and then it was ok, then i change the memory 256mb, 2 days after again the logo toshiba, i did 08-690, i...
ok, i did that, but I still not print in this machine, do you know if this king of copier only printing with the license that you need to buy to CANON DEALER, or I have a imagepass S2, but i can not...
Hi, I have IR5075, I can not printing, the message default key invalid, I change other HDD, BOOT, from other machine that is working in other place printing, but I still can not print, any idea, how...
yes, i will fix the controller, but it to hard, thanks, i tell you if i can do that, later
I did that, I change all, boot. dimm, cables, etc, exactly the problem is the controller, I hear that on chip in the target cause false contact, but which one, this is my question. Maybe someone had...
try with 08-694, few many days ago i have the same code, then 08-690 it work for me