You can fix this problem with FW G00-B6/G00-E9.
Type: Posts; User: Bix
You can fix this problem with FW G00-B6/G00-E9.
From personal experience, it is due from the marketplace. When you configure the printer and it is not connected to the internet, the marketplace does not configure the screensever correctly and goes...
They did it for a longer consumable life. The justification was to fit color standards.
The problem is the display, replace it.
It happened to me on some c250i.
The solution was to unscrew the rear screw of the ADF.
The firmware didn't work for me. I have not tried with that of the bizhub C250i.
I proceeded with the update via WWRSPF which worked but I don't know what firmware is used.
I was able to update remotely
Maybe Konica Minolta did some poultice on infohub in EU
Hi, I have a confusion with bizhub C450i.
Today I proceeded with the firmware update but it failed. The printer works perfectly and the USB ports are enabled. It currently has G00-B6.
I have tried...
It happened to me after changing the dispwitch and doing a firmware update. Just turn it off and on again.
If no previous skill function, address book backup and clear all data.
Hi, today I first installed a folding unit on iSeries (bizhub C450i). In the new iSeries interface, I don't find any reference for folding but only for stapling.
I go back to the old interface to...
Yeah! This is what we need do to: Access less secure Gmail apps
Hi, advice. You try to write in the same thread. This is the third one you create on the same topic and it could cause confusion for those looking for your problem in the future.
Three cases are...
How did you solve?
For Konica Minolta, theoretically, this procedure should be done for each installation. But honestly, this is unthinkable if you have to do 20 installations in one day.
The...
Hi, if it worked it means that in the previous account you have to enable "access via unsecured apps" in the Google security settings.
This can help you for the next few times.
This is a known problem. To fix, remove the UI and shake it well at least 10-15 times.
Run full color test pages and the TCR will go down.
Theoretically you shouldn't touch LMS. If the printer is connected to the internet, it obtains the license automatically.
If someone has removed the license from LMS, I believe KM intervention is...
Hi, is the series always 8/iSeries? The procedure is the one listed above.
If it doesn't work, there is some problem with the network.
For the 4 series, optional paid options are required.
There are no replaceable filters on the bizhub C258.
Hi, if the CSRC also returns error 3002, there is some problem with the network communication.
1. Is the network cable connected correctly? Are the LEDs flashing?
2. You make sure you have...
It depends on which customers you want to manage. If your customers are schools, churches, small companies that use the printer only for printing and not much for scans or other, I suggest the 4 / 4e...
Yesterday I discovered that if you go to "Maintenance - Import Export - Counter", if you have active authentication it allows you to extract the values of the counters for each individual user in a...
that's exactly what I meant, great!
I went into the "Printer information - report" or "counter" settings but found nothing.
This is fine! Thanks again.
Hi, connect to the internet.
Check gateway and DNS.
Now turn the printer off and on again. Now it should no longer ask you for your license.
If you suspect that the customer has a strange...
Hi guys, I would like to ask you for help to quickly get the print reports of the accounts configured in the authentication.
Now to see the color/black and white prints, I log in for each...
Hi, remove the finisher/job separator and try to rewrite the firmware without.
To reset the finisher/job separator, update it individually or update on another printer.