Search:

I will be honest. I prefer the Classic application, it is less cumbersome and the main thing is directly, and not through secondary accesses.


One thing that changed in the clients and in the...

I suffered this breakdown a few weeks ago, on an identical model.


In my case, I adjusted the tension of the Pressure Roller dampers and replaced it (when touched it felt too soft). It also...

My intention is to experiment.







Regarding the situation, I fear that it will be postponed, the "recycled" devices for testing (according to confirmation from the supplier), are set...

It's not for that reason.
The CTL shows a 'SC 672-00' and honestly for the cost of a new CTL, we have managed the sale of a brand new 'IM C2010' machine. ;)


Sorry if I didn't express myself...

I have located the parts, but I'm curious if anyone tries to change the CTL alone. Obviously it will be necessary to replace BICU as well.


But I'm curious to know if anyone did the experiment of...

The device is "MP C2004" (without PS3) which has been installed for more than 7 years, was installed new, and was replaced with a new "IM C2010".
Obviously we want to recycle it to install it in a...

It could also be a case of paper with moisture.
I would try a different A4 package.

In my opinion, I think the problem is in the development units.
The noise could be caused by their hardening, losing component by the caps/busing and I wouldn't seem strange, that the pine nuts are...

Surely, it will be a silly question. Where is the reference code of the USB communication cable between 'CTL' and the 'Operations Panel'?
I can't find it anywhere.

The toner is original. A query was made in RICESS to find out the status of shipments of "defective" toner, and the response was negative.


During said consultation, Ricoh Spain was informed of...

Sorry, for some reason the post was duplicated.

Have you tried a different HDD/SSD?
This defective may, I recommend that you make a formato from a computer instead of using the machine system, so that possible defective sectors are corrected.

Check the Fusion Unit, in case it was in bad conditions (band, rollers, bearings ...). If not, check the lower entrance guide to the Fuser Unit, it can accumulate dirt or deform over time.

Since most of my esteemed colleagues here have said things that I will not repeat, I will say the following.


The RICOH brand is best known for the quality provided by the technical services of...

I would activate user control and a code on each computer. You'll see how the rat jumps xD hahaha

Luca, you are already one of mine xD hahaha!!!


From time to time, these bugs come "alive" and do what they want, or rather, they don't feel like doing what we need from them.

The type of paper is usually the great thing forgotten by the client when working with it.


I know few clients (except very veteran copyists) who know how to pamper/take care of the details with...

I am really curious to know what compatibility there will be between the xx00 series and the current xx10 from IMC.


I don't think it would be profitable for you to make a new series of drums,...

UPS!! xD Fail my, sorry.

Install an FTP Service?


If SMB/Samba is not possible, FTP on Windows XP would not be a bad alternative. There are still some applications that are "compatible" with that version of Windows.

After 6 months, I can confirm that the adjustments made and the changes have been SATISFACTORY.


Therefore, it is advisable to raise the temperature with respect to the base, by 6 or 7 degrees...

Dear Grave Looter.


Please do not revive this post unnecessarily, and if you need to, create a new one.

1º- I would check the firmware update.
2º- Check if you have installed the latest version of the PCL6 Print Driver. I do not recommend the Universal Controller.
3º- In Settings > Printer > Find...

And the Printer and Scanner version?
I consider that the data you have provided is more relevant than the Engine, unless it is the version of a Package.

If the office is in a different location and the scanning is through a WAN network and not a Conventional LAN, the problem could be in the DNS that the device has.


Check if SMB V2/V3 is active.