I am going to have to scrap the machine if I can not get a quick resolution to the issue I described. Anyone have any idea why the printer would perform a nozzle position check outside the sensor...
Type: Posts; User: ericwil76
I am going to have to scrap the machine if I can not get a quick resolution to the issue I described. Anyone have any idea why the printer would perform a nozzle position check outside the sensor...
Ok so I am making headway.
I have resolved the 2F26 error code by replacing the linear encoder strip. Head initialization is great now.
I am still getting a 2F30 error code after noz pos check...
I have replaced the carriage and ran through the calibrations per the service manual and I am still getting the occasional 2F26 error along with my original issue of the nozzle check misalignment. I...
I have my new carriage and will be installing it tomorrow but the manual calls for soaking the carriage felt cleaner pads in EU-1 a grease or oil. What can I substitute for EU-1 can't find any info...
So the belt looked fine I was suspect of the carriage bushings though. I did clean the rail it was very dirty and it did temporarily clear one of my other error codes 2F26 but it returned a few days...
Hey guys I am stumped here. Been working on a dodgy Canon IPF770 and was getting nozzle check errors non stop ran nozzle position check in service mode and still fails with a 2F30 error complete...