Ok thanks, I have ordered a drum driver PCB and will go from there.
Type: Posts; User: vwbay72
Ok thanks, I have ordered a drum driver PCB and will go from there.
Hi,
The machine has been running for a couple of years, it will print 1 page then throws the error code, the print that comes out is very feint.
it seems there is no toner in any of the dev...
Hi,
I have a canon iRAC 5235i which is showing E020-0x91, there doesn't seem to be any toner on any of the dev rollers, toner bottles have toner in them ATR shutter is working and sensors are...
Hi,
is there a blockage from the toner hopper into the dev unit? the ATR sensor in the dev unit measures the toner/dev ratio and main controller does a video count.
could either be a blockage or...
If the control panel is unresponsive but the energy save button works ok then the fault is the CPU PCB which is under the control panel.
Part Number: FM1-R833-000
Ok, great, thanks Floody:)
Just seen the examles, Genuine Canon drum units will fix this.
Hi,
I would check that the ITB is being cleaned, if there are streaks then replace the ITB cleaner assembly FM4-7244-010.
Hi,
I have a Canon iRAC250i that is dead apart from the energy save button and a green LED on the bottom of the control panel.
I have replaced the power supply but is the same.
Has anyone...
Hi,
I have resolved this by fitting a 24V DC power supply.
Thanks Roho, i was wondering if it could be the riser PCB, i will check that out.
Cheers
After 5 years Canons are due for replacement, after then they become unreliable and new models have been released for the customer to upgrade to.
Hi,
I have a irac7260 which is throwing up different error codes when switched on (E075,E022,E023,E815 etc) the ITB is central and no blocked waste toner, im beginning to think its a 24V dc power...
I have had this problem and had to replace the drum drive unit to resolve the issue.