Yeah. I ended up doing what you suggested and found one of the gears was broken. Thanks!
Type: Posts; User: rrutter81
Yeah. I ended up doing what you suggested and found one of the gears was broken. Thanks!
Ok i found the culprit. One of the plastic gears broke off in back for whatever reason.
/sigh
this printer loves to break a lot
For fun, I replaced tray 4 with tray 5 and the error follows the tray itself. So placing tray 4 in to the tray 5 slot gave me a tray 5 error.
Hey Phil,
Thanks for the reply.
I dont see anything amiss when i pull the tray out.
Hey guys,
Looks like my phaser is giving me another issue and you all have been my go-to over the years. Tray 4 on my phaser is giving me problems and wont allow me to print unless I leave it...
Last update just incase someone else has the same issue.
The seizing of the belt cleaner did indeed damage the transfer belt and needed replacing.
After changing the belt, everything looks...
Just an update:
I took out the transfer belt assembly and found streaks of toner caked to the belt as well as it not looking the best in shape. In a last ditch effort I took some windex and...
So i replaced all the drums, waste cartridge and belt cleaner but now my prints are all out of whack.
White streaking / light color in the same position regardless of color.
I am assuming my...
I am suspecting you are correct as there is a light dusting of black toner here and there upon initial inspection.
I've opened this thing up before swapping out parts. I'll update the thread when I...
We know that wont happen.
Figured I'd ask before I opened it up.(again)
Hey all.
I came home today to hear my xerox 7800 with an obnoxious buzz and then go in to a boot loop. Attaching to the comms port, i dont receive any useful information short of it failing to init....
Thanks for posting.
I took an old 200 gig hard drive and threw it in the phaser and ALT booted it. It made it's own 100 meg partition but didnt take advantage of the rest of the drive. When i order...
I get it. Most people want it to just work.
To me, i want to know how it works so i dont "need" some secretive xerox tech.
I am also an engineer for general motors so this stuff is kinda small in...
for $5000? no thanks.
ill troubleshoot it.
1500 for the unit. - paypal issuing me a partial refund
130 for control panel
70 for sd card
-possible replacements:
110 hard drive
So after noodling on it last night. I figured I'd let the machine continue the boot process in hopes of understanding if a motor drive board was bad or something else of that nature.
After hooking...
So another update.
I went to a local Fry's electronics store and cobbled together a "poor man's" usb to ttl rig. After using a multimeter on the J14 connector (pins weren't labeled) and listened in,...
I pulled the ip board but the control panel doesnt even light up when i do that.
I am assuming youre talking about some external software like pws?
or the uart serial port?
regards
Yeah i saw that. I can pick up a ttl to usb cable. However, capturing that information seemed like a rabbithole. Im not sure if i need special software to read it or not.
Also. I found out that...
Well.
I replaced the control panel and still have an internal communication failure. LED on the mainboard still blinks 6 times and then repeats.
I'm kind of at a loss at this point.
Maybe the...
Just an update.
I replaced the sd card and have the same 6 blink led error. I had a hunch that wasn't the problem as the led blinking indicator shouldn't be giving false positives. I at least have...
thanks for the advice. its top on my list!
Im telling you. The FPGA is detecting a problem with the hardware before the thing even goes to boot.
I tried the ALTBOOT - forced upgrade method. It does not work. It's like if you tore your ram...
This doesnt quite explain the 6 blinks on the mainboard led health indicator. Also it isnt a blank display.
39761
39762
Not sure if i should trust the control panel cant communicate or...
Yea i checked the sdcard (i cant read it due to the partition being wrong?) i chalked it up as an encrypted sd card, reseated the ram (contacts are clean), reseated the hard disk. Nothing.
Yes i have the usb stick.
The issue is it fails the Power On Self Test (POST) sequence.
No energy star logo, no fans, no nothing.