Thank you Ropariva, the customer finally got back to me and I have the fuser now. I will be going out today and putting it in.
Thanks again
Cameron
Type: Posts; User: vstar
Thank you Ropariva, the customer finally got back to me and I have the fuser now. I will be going out today and putting it in.
Thanks again
Cameron
Thanks for the responses. This is the first and only one of these I have seen, so the company won't get a manual for it, so I just need to go off what you say.
If I turn the machine on without the...
We are a Lanier dealer but a new customer asked us to look at this unit. It was working fine last Thursday and when they came in Friday morning the machine made a loud grinding noise and popped an...
Thanks to everyone that helped me, I got the machine working. I pulled the transfer belt assy out and cleaned 2 sensors above it. I am guessing those are the ones it looks at for setting color...
36074Here is an example of what this machine is doing. I hope this works, this is the first time I have tried uploading a picture.
Thanks
Cameron
Thank you ivan123, I was able to get into the service mode. I ran the sim50-22 for the 3-d effect and it came up as fail. It gave me a failure of Data_Sub_C_F_head 20, I tried searching on the web...
Thank you so much.
Cameron
We have a customer that has one of these machines and it is giving a 3d effect. I found that a registration adjustment in system settings maybe could fix it. I also found sim 50- 21,22,23 could fix...
The media is the labels you get from stamps.com.
Cameron
Hi everyone, it's been a long time since I have been on here. I am havening a problem on a customers machine. Using stamps dot com from the post office, they don't fuse very well and track. It is a...
Thanks blackcat4866, this door is below the bypass tray but they could call it that. I have seen other things called strange names for there location before.
Thanks
Cameron
Would someone be able to give me the parts number?
Thanks
Cameron
Thanks mbal, that black guide that pivots in the second pics is what I am looking for. Thank you so much for posting the pics. We are a Lanier dealer but a customer has this machine also.
If I can...
Sorry I don't have a pic. It is a black guide that tilts out when you open the door. The paper runs between it and the inside part of the machine. If you had the parts manual the shows the feed...
Hi everyone, I was wondering if anyone would have a part number for the paper feed guide. This guide is inside the side door below the duplex and bypass section. One of the pivot points broke off and...
So this machine requires a bypass or finisher to work?
So there could be 2 problems then.
Also, do you know if the drum drive belt is the same as the 9203 model? The number is 23E32380.
Thanks
...
Thanks Flash. My boss unplugged (2 cables) the finisher from the machine then turned it back on and it still said finisher problem. If the drive belt is bad would that keep it from resetting other...
Thanks for the info RobertABD. Yes the code does say drum drive, but when my boss got there and checked the fault codes it said finisher error. Could these possibly be related? He can't get the error...
I have an update for everyone. If you check under the fault codes it says the finisher, but my boss unplugged the finisher and fired up the machine and it still says the same thing.
Is there a way...
Thanks everyone for the info. We will look and see if the belt is bad.
Thanks again
Cameron
Sorry everyone but it could be an error code of 8094-534 but I am not sure. I am getting this second hand.
Thanks again
Cameron
Thanks everyone. I got this thing working. The fan was not turning and was coated in yellow toner. I blew it out with canned air and got it turning again.
Again thanks for all the help.
Cameron
Hi, would anyone happen to know what a fault code of 094-534 is on a colorqube 9201 is? We work on Lanier models but a customer of ours has one of these and wants us to fix this.
Thank you
...
Thank you, Choclit008. I do appreciate it.
Thanks
Cameron
Thanks Cookr that does help. You wouldn't by chance have a part number also?
Thanks again
Cameron