https://apis.mail.aol.com/ws/v3/mailboxes/@.id==VjN-f9TBTUu4DmS_LNMN9sKB9eqJfCx8VC3w3jRD0WHWSke8fvxhEWoJF1XbZS7eCBKT/messages/@.id==ACr8JkBeKbvTXREt-AWhaKXS7hM/content/parts/@.id==2/thumbnail?appId=ao...
Type: Posts; User: axyun
https://apis.mail.aol.com/ws/v3/mailboxes/@.id==VjN-f9TBTUu4DmS_LNMN9sKB9eqJfCx8VC3w3jRD0WHWSke8fvxhEWoJF1XbZS7eCBKT/messages/@.id==ACr8JkBeKbvTXREt-AWhaKXS7hM/content/parts/@.id==2/thumbnail?appId=ao...
Does anybody out there service this model and have familiarity with this hinge breaking because
it is difficult to find part # in parts catalog
I was looking thru parts catalog which shows different part #s depending on which model in series. Seems to separate them into dadf model,adf model and copyboard model. The MF4890DW is categorized as...
Thank you Richard. Customer had called someone else as I was non-committal + said I would get back to him after researching. He was anxious to get it fixed asap.
Thank you Richard.
This customer is contacting me again. He said on April11 that the machine was "getting worse + worse + he would have to restart it3 or 4 times before being able to print. He was using a Xerox guy to...
OLd customer called tht used to have a ricoh and now has WC5890. Sent me info that screen says
status fault scanning not available
x 14-517-00 skill level...
Actually there today and customer had it reversed. It was h3-02 and the
Fuser belt was damaged, with pieces coming out. I also tried to enter simulation mode
But could not. I pressed the home key...
Thank you for your help. Is it unlikely to be lamp or thermostat?
Cusomer has an MX-B402 and called to say that when he tries to scan in color that it shows in black + white. I hardly know machine . Is there anythingI or customer can do so to correct this problem...
Looked in SM and said upper main thermister open. Can anyone confirm before I go there? Frank
When I checked main charger the grid did looked a bit pushed in with grid in that spot stretched . I swapped the
quality of copies was restored. The customer is using generic toner, though that...
Thank you for your responses and advice. I did not do a U130 as I did not change developer unit. It was changed 6 months ago. I do not know how the image looks
as I am going by customer...
Changed drum unit + fuser unit + transfer unit on KM3035 which were items I had. Previously print was a
a little light one area due to drum unit. This was yesterday. Customer called this...
Can a black drum unit be used in place of a color by making some modification?
Thank you Zed. I believe he just needs drum units. One place on ebay (vegadistributor) in Phoenix,Ar. selling for around $210 w shipping. Claims New modified oem drum units. I sent question...
I am a little surprised at the cost of color drum units. Are these prices for single color or are they sold in set. Also, are they including the developer part of unit? Do most techs rebuild these...
sorry for responding to your replies so late and thank you so much for your input. was at customer today and changed tb cleaning unit which was a significant improvement but drums will need to be...
mpc2000 sometimes will print a demo page overlapping the print or copy.Firmware upgrade?
Also lots of background/lines + drums look ok but am changing transfer belt cleaning unit which is...
Thank you fot that Tehandtrader
post was from 2014. Could try EBAY. I USUALLY DO SEARCH FOR PRODUCT CODE OR DESCRIPTION and then check out results.
WC7556 has magenta toner empty and replace messages though new toner. Found broken coil om toner dispense pipe asm for magenta
at front of machine where gear engages. Did not take a good look at...
On Feb 8 changed black dv unit and developer and quality has improved significantly. Customer had said she had
heard a loud noise on the right side of machine. She thought perhaps from rear of...
Thanks Kyo fan. I took the unit apart(my first time) not feeling very confident and , yes the plastic shaft was broken. I suppose I
could put it all back together again. Customer asked how much...
Just wondering if that info about removing the delivery collars(ff6-0345-000) in delivery section is recommended generally on various
Canon machines. I had jamming problem on IR3245 and one was...