Search:

Sorry for the late reply on this. I just wanted to detail what has been tried thus far in case anyone has any other suggestions.

- Tried all of the options for Sleep Power Mode.

- Tried...

When the user attempts to print, here is what happens:

1) LCD lights.
2) Unit makes noise as if it's warming up.
3) 2-5 seconds.
4) LCD turns off and unit goes quiet.
5) About 10 seconds. ...

I'm trying to configure an MP6001 to print incoming email.

I have set the following:

Reception Protocol: POP3
Email Reception Interval: On / 2 minutes
POP3/IMAP4 Server Name: (my POP server...

I improved the print from the MP 6001 significantly by printing from InDesign and setting "print as bitmap" at 1200 dpi. It's still not quite as good as the SP C312DN but it's good enough.

If...

I printed the same photo with my SP C312DN, driver set to 600 dpi (top), and my MP 6001, driver set to 1200 dpi (bottom). The difference is very noticeable. In spite of the SP C312DN printing at a...

How can I tell what model number my fax board is?

I found this: http://www.tams-media.com/tabs2006/3500c/en/pdf/SH/GD-1210_1160_SH_EN_Ver00.pdf but want to make sure I've got the right manual...

I have a Toshiba e-Studio 352 copier with fax board. It can't send faxes to some of my clients, or requires 10+ tries to be successful. Other clients have no problems.

I have tried reducing the...

Very true. Unfortunately, it requires training the user how to do it. You can't just walk up to my machine, enter a fax number, and hit start. It's not intuitive to use which is something I'm...

Thanks. I already have an email-to-fax provider. I'm looking for a piece of hardware to go with it, that works just like a fax machine.

Does anyone make an internet fax machine?

I'm looking for a device that a user can walk up to, stick some paper in, enter a fax number, and hit start, without having to have special knowledge of...

Thank you :)

I have a Toshiba e-Studio 352 with fax board. I'm looking through the log and notice these codes under the "Mode" column.

I'm pretty sure EC means error correction because it only appears when I...

It's been a while since I've had a chance to look at this because of a snafu with the phone company. I had a tech from Toshiba out today. According to the carrier, the attenuation was already as it...

Is it possible to configure the FILE_SHARE folder on a Toshiba e-Studio 352 to allow users to write to it?

I was thinking it would be useful for users to be able to use the unit's hard drive as a...

Thanks!! I'll see if I can bribe someone in TBS' service department to let me take a peek at that manual :D

Edit: Looks like the next step down from v.34 is 14400. Is there any way to force...

Is there a way to configure the unit to default to "Quality TX" mode when sending a fax? I can set it per-fax, and I can set it in the address book, but I suspect users will forget to turn it on...