Search:

302K994200

PARTS PWB JUNCTION ASSY SP



Kyocera tech support called it a relay board, Thinks it just the paper feed board for the MPT

The airprint option is not available on the web interface. I can see my MPC 401sr but not this newer model. It does have the wireless and I'm on the customer's wireless network but can't see the...

Just ordered a new board from Hytec

Sir, I have taken the MPT apart to check sensors, lift motor problem and gears. It acts as if it gets a spike to the lift motor to turn on even with the tray in the upright position, I have also...

I have this C1000 intermittent code on a 7002i, It says it's bypass lift motor and I do see the lift plate in the up position. Everything mechanical looks fine after taking apart the MPT. Tech...

I have a Canon TA-20 Large Format printer for sale for 1500.00, plus shipping, new in the box

I have 4 FS-533 Konica Minolta Internal Finishers for sale. $350.00 each plus shipping

Also a PC-415 paper pedestal for $450.00, All new in the box

I'm asking, what can make it unlock on it's on, so that the ITB is not close enough to the drums to get a good solid transfer

I have a C5250 that the ITB pressure release lever slipped out of position causing faint copies. I repositioned it and copier is working fine. But I'm concerned as to how or why it may have released...

The manual does not offer a lot. When Ricoh says power pack, are they referring to the power supply board

My WiFi and Bluetooth tabs are greyed out, how do I turn them on, or does Toshiba require something extra like the older models

I have a customer that pulled the drum unit carriage assembly out to install a new drum. The carriage assembly will not go back in, only 1/4 of the way and seems to be hitting something on the frame....

Am I correct on the position of the release cam. Arrow in the up position to release the pressure on the belt unit and the down position after installing the new belt unit

I have this code on a C5250. I have checked the ITB unit and cleaned the rollers that the belt rides on and reversed the belt. My ITB values were 548-564. I adjusted the bracket on the ITB unit and...

I'm looking for the service and parts manual for the Dell C7765dn

The copier started off with very faint black copies and went to no image on the copies and not trips the code E025-450. I looked at the black hopper and can turn it manually but it doesn't seem as...

I replaced the PTC unit with a brand new one and continued to receive the same code. I then went to Sim. 55-1 and set switch 8-3 to 1 instead of 0. After that I started getting C4-10 code but can...

I have 2 of these machines in a Title company office. Of course with this type of business, there is always letter and legal. I'm trying to scan to desktop both letter and legal. I can used mixed...

Thanks Guys, The black Drum unit was the problem

file:///var/mobile/Library/SMS/Attachments/65/05/8DC34C5A-430D-4818-B041-B70DB98F3EE4/64668065495__7BB6E54E-07A1-4D23-9AFC-9BE1DA8FCA9E.HEIC

not sure if this picture will come up

I ran a single magenta, cyan and yellow copy and get the same dot image. I would think in these cases the only drum or DV unit being used is that particular color. I swapped the fuser to no avail and...

I have one these copiers that is putting black dots or spots on the copies. Each individual color has the save problem, they are there whether internal print or copy. The spots do move, which lets me...

I have a F520 code on my ES 457, I have the firmware installed on a 16gb USB and when I insert in the copier and pull up mode 49, I get the message that, No Data is on the USB storage device. I have...

I had to format the hard drive for the F101-4 code and need the new firmware to get rid of the 520 code

I have this copier that when paper tries to lift in tray 2, all I get is clicking as if a gear is broken, the motor is trying to lift. However tray 1 does dot try to lift at all. I swapped the lift...