Search:

My printer often gets paper jam and the top margin is off the mark. I saw following video about solenoid problem
with 2400 series printers.


https://www.youtube.com/watch?v=4n7cIiyrk_Y&t=58s
...

When I start the printer, most of the times I get the message on the display which
says that "Cyan Toner is Missing". The toner is there and properly installed. Only some
times the message doesn't...

​I have a Xerox Workcentre 4150 /XF with 40 GB hard drive.
It is very slow when printing. It takes hours to print
just a 50 page document.


What could be the problem? Will it help if I reformat...

I have this machine with 256MB memory. According to product brochure it can take an additional 256MB RAM more to upgrade the total memory to 384MB. Where to add the memory? I removed the small cover...

Thanks a lot for your post. I checked the wiring going to Tary 3 and 4 and it seems to be ok. What else could be wrong?

Also, I have another Workcentre 4150/X which gives Error Code: 03-250 when I...

I bought a used Workcentre 4150/XF from some one which as you know has 4 trays and fax capabilities. When I start the machine, I get the following messages:

1. Tray 3 and Tary 4 not detected.
...

Thanks again for your post. One more question! The product enablement key you are talking about goes in the front, back or side of the machine?

Warm regards,
MK

Thanks for your post. I have a question. You said insert the key. Do you mean Network Scan enablement key or some other key? Also, I checked the drawer and I don't find any other key there.

I...

I have a Xerox Workcentre 4150 machine. It gives an error which states that "The System Operation Key is missing". The light on the side where the Network scan Enablement Key is inserted blinks red....

Hello,

I have a Xerox Workcentre 4150 machine. It gives an error which states that "The System Operation Key is missing". The light on the side where the Network scan Enablement Key is inserted...