Search:

update

resetting the transfer belt from the ‘new release’ menu in service mode sorted this error.

There was no life limit warning pertaining to the ITB itself only the transfer roller.

The...

ok, there is a code it’s

L-5

i think that relates to transfer belt out of life

strange because the warning only says change transfer belt soon and there is no life limit stop warning ...

Many thanks for this tip. Is the oil can on the first page of the service mode?

I have been in and out of the service mode a few times but I don't remember seeing an oil can. I will check again...

this was my thinking too but there doesnt appear to be any stop error warning in the admin panel like there usually is and i have tried to reset the ozone filter and transfer roller but they don’t...

Can anyone explain where I might see the exact error code relating to the orange light.

The copier will photocopy fine but it will not print, says offline on client (pc).

There does not appear...

Update.
A new drum unit sorted this issue.

Now I have another issue. (will it ever end with this thing).

I think I made a mistake by not swapping the chip on the drum. I installed a KM drum...

Here are the consumables, I think most of them are beyond life limit. Someone before me has reset them.
The paper has test printed on it, does that help with the direction? or do you mean how it...

What is the most likely culpret causing these black lines (pictured). Olivetti c280 or KM bizhub mf280
The printer has previously had almost everything reset without replacement I think. The black...

And the answer is.....

Yes, they do fit, yes you do need to modify the hole in the plastic to suit (easy job with a drill).
They do have a chip on them but this can be swapped and it didn't cause...

Guess I will be the first to try this then.
It is also possible that the Olivetti developers are chipped too. In this case I will try to remove the chip from the old one and install it on the new KM...

Thanks for the reply, I'm pretty sure the ones at 100% have already been reset. I have not reset anything before on this printer and some of the end of life forcasts are years old, so I'm guessing...

Ah, To be honest I thought there would be an issue like this, I guess they do it on purpose to control the prices.
However, has anyone modified the hole to make these fit?

Excellant news because I can get the KM DV311k much cheaper for some reason.
Many thanks

Hello again. Good news is the copier is still working.
I've been on site today for another issue and with closer inspection it seems that the unit actually reporting that the transfer roller needs...

Hello, as we know the Olivetti D-Colour MF280 has many names, like the KM Bizhub c280 etc.
I know that the toner cartridge is slightly different but you can just swap the black top pieces on them...

Yes I'd like to save them a bit of money and make a profit, there's nothing in it for me if I buy the OEM unit really. In that case I would do a reset and wait till it fails.
However, if you have...

Thanks for the advice, this is not a contract customer and I think this unit may have been reset before.
Can anyone suggest a good source for the rebuuild kit or the parts
(belt, cl bld & fuse)?
...

One of my clients has a C280 that has just popped up with a transfer belt needs replacing soon warning.
Roughly how many prints before it hits the life stop?
Can the belt be changed with generic...

Thanks for your help.

This issue is now resolved. The answer was again that the machine control panel has access to settings that cannot be seen from the web admin control panel. I maybe being...

I Have moved this Tray issue to a new thread. Thanks

When printing with the tray type as plain paper, everything is fine. However, if I select tray 2 as 'Special paper' from the MFC control panel, then send a job as 'Special paper' the MFC errors,...

When I select the button to change tray setting from the windows PC driver page, tray 2 does not show as letterhead, if I then push the button for ‘Reflect device settings’ nothing changes.

So I...

Maybe I spoke to soon, when I said everything was sorted, or maybe this is a seperate issue.
The initail problem has not returned, everything else seems ok apart from the paper tray settings.

I...

Many thanks to everyone who helped in this thread, the issue is now solved.

Qudos to blackcat4866 - who suggested the driver was at fault.

I was trying to trouble shoot this remotely and after...

Thanks again for the help.
1, Yes my driver looks the same as the picture you posted. It is the PCL version rather than the post script one you have but that shouldn't make a difference.
2, First I...