Many thanks for your help here guys, it's much appreciated.
Type: Posts; User: FRIDGEMAGNET
Many thanks for your help here guys, it's much appreciated.
Thanks for the reply JSC, when I spoke to Kyocera earlier today they said they'd never seen it which made me go down this route.
So, does the new eprom/firmware update not back up the meter reading...
Hi
I've got a TA5550CI that has been running fine for a couple of years and suddenly last quarter the customer noticed (they look at the readings monthly) that it had a fax count of 6.7m!
It has...
The cost is fairly low, about £60 I believe. What your employer is probably more concerned about is losing a body from the field for a week. That's about 30 calls at an average of 5 calls a day....
I'm in the West Midlands too, having returned to the tools for the last 2 years from management I can say, from friends in the industry, that a trained copier engineer with 5yrs experience is...
I am looking for work in the Midlands area of the UK.
Currently living in the Birmingham region. I worked for Ricoh UK in Technical Support for the last 11 years and am trained up on most copiers....
Ratio went to the wall last month and it is not possible to get activation keys any more as far as I know.
Lego is very cool when you do clever things with it.
http://www.youtube.com/watch?v=5fAn5A0HbhU
http://www.youtube.com/watch?v=Mp8Y2yjV4fU
I think this is a reaction to a Ricoh run forum that has been running in the UK for the last 6 months.
www.ricohtechnical.co.uk
Hi
The 3000 that were being refered to is for the whole of Europe!
UK have got 30 in and, I am told, are being sent to problem machines.
As of Tuesday Europe only had 600 still in stock.
Hi
Q1 - The HDD is SATA - this is from the manual:
HDD: A 2.5" HDD (more than 40 GB) can be connected using an S-ATA I/F.
Q2 - The documents are stored on the HDD using Ricohs own version of...
Hi
Not sure if this is the correct area to post this, but as it is not manufacturer related here goes - mods please move it if wrong.
I used to know of a phone number that you could send a fax to...
I guess I will have to make sure I look at this when I next visit these 2 machines.
Thanks for that.
I think this is an interesting question. All the PCBs, motors and gears are the same so what gives it the different speed.
I heard that it is programmed in at the factory, but what happens when you...
Make a test print in cyan and then magenta.
Then lay them on the transfer belt and see which PCU the lines match up with. Then see where the lead/trail edge of the paper is. If the lead edge is at...
God I can think of a few offices I would like to see this guy!
http://www.youtube.com/watch?v=dUSiibUFzGs
Hi
This is a recognised problem that occurs when you have a SR790 finisher installed.
The finisher ROM needs replacing.
Permanent Countermeasure
Replace Finisher ROM ( B4089450)
As this is...
Thanks.
But why Fulham? Do you have a history with them?
Thanks for your input Zico.
I have been servicing these machines since they were launched along with the whole Ricoh range and have indeed seen the problems you mentioned.
We have always had...
Hi all
Has anyone had a problem with these ranges over the last week with lines on copies. It seems only able to be fixed by replacing the PCU.
It does not seem to matter if the developer/dev...
I had a new machine that did this, turned out someone on the network had an old PS driver for their old machine and had the same IP address as the new one.
Changed the IP and got rid of the problem.
I had this and the machine had 3rd party yellow toner in it.
The image had a large area of solid half an inch from the lead edge.
It was jamming at the fuser exit and looked like it was sticking to...
If the numbers are not on Esparto they can still be raised on it by contacting your dealer sales.
As for the connectors, I tried to order them but was told by Ricoh that they were not going to be...
This is where knowing the Model Code comes in handy.
The D372 (from D3725112.fwu) is the SR3050 finisher.
The B793 (from B7935102D.exe) is the SR3000 finisher.
I started out life as a slot machine & juke box engineer and had a call to a pub one night to find a cat stuck in the speaker enclosure. He had crawled in when the cash was being emptied earlier in...