Make sure 2 factor authentication is on and an app password is set up for MFD.
Also make sure that the sender name is the same as the email address for the account.
Type: Posts; User: leo34staffs
Make sure 2 factor authentication is on and an app password is set up for MFD.
Also make sure that the sender name is the same as the email address for the account.
Sounds like polygon motor in laser unit.
Have you checked that the cleaning lamps are actually working?
One thing to try is changing "other user" to having admin credentials
No, but here is the rest of the answer from support site: Make sure of the following settings to ensure correct operation.Network settings > External Print Services Settings > AirPrint Settings >...
An iOS device can print to a MX-XX50/XX60/XX70 device using authentication. However it must be as username and password, not a PIN number . This is an iOS limitation. (From Support)
All machines that have been refurbished get the data initialized, i usually request that DHCP machines get reserved by MAC, but the IT guy said their system is not so simple, although this is not my...
Hi Guys,
I installed a machine this morning using the same ip address as the MFD i pulled out. We could not get the copier to respond to a ping? So, we put the machine on DHCP and then the machine...
Look for the Existence detect plate (LPLTM9475FCZ2 Existence detect plate A) in the parts guide, it looks like there is a series of connecting strips on the part that locks the drums and devs in...
Look for the Existence detect plate A in the parts guide, it looks like there is a series of connecting strips on the part that locks the drums and devs in place, it looks like they are connected in...
These are supplied by Sharp for their machines under a contract.
If you take the paper detect actuator back out again what happens? i have had an actuator that got bent and was not going up up properly thus causing paper jam.
Try that first, also the clutches...
What is the part number for that?
BP Series have a charge roller and not the grid system like previous sharps, so I am optimistic about BP Range.
The harness can be ordered separatley: DHAI-4663FCPZ BF GN C CRUM harness (this does all 4 toners)
Sounds like you need to move icons from page 3 to page 2?
Yes you can!! I have just tried this on an mx3060 (cr4) and from network folder, you press where it says input address and click browse, this will display the list of pcs on the network, click on pc...
Does it work on copy mode? i had something similar where as print was missing a channel and copy was ok. Sim 67-17 sorted this for me, odd one.
If you have had them failing after install i would definitely do them on setup, the handy guide states f+1 or r+1 is OK.
Download a free copy of hdd raw and see if that will see the sd card, from there, if the card is OK you can clone it to a new sd card, although firmware may need to be installed after.
I had something similar on a customer who upgraded the server, turned out it needed Domain\User as credentials....try that
For Clarity: copied out of operational descriptions
Waste developer (BK) full detection operation
There is a first collecting part where the waste developer (BK) is
deposited inside the waste...
The window you are talking about in the 601HB is for waste developer (not toner) for black, that's why it is never filled up. Otherwise it works the same as the 607HB.
You could try System settings - printer settings - condition settings (change from Auto to b/w)
IF the firmware is not too old, the Staple & Fold
positions for Saddle Stitch can be independently adjusted
using SIM3-10 (CJ = Saddle Stitch, CK = Saddle Fold).