Search:

Type: Posts; User: leo34staffs

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Re: MX3050v Developer pulling (and problems)

    Have you checked that the cleaning lamps are actually working?
  2. Replies
    8
    Views
    648

    Re: Airpint with authentication

    One thing to try is changing "other user" to having admin credentials
  3. Replies
    8
    Views
    648

    Re: Airpint with authentication

    No, but here is the rest of the answer from support site: Make sure of the following settings to ensure correct operation.Network settings > External Print Services Settings > AirPrint Settings >...
  4. Replies
    8
    Views
    648

    Re: Airpint with authentication

    An iOS device can print to a MX-XX50/XX60/XX70 device using authentication. However it must be as username and password, not a PIN number . This is an iOS limitation. (From Support)
  5. Replies
    4
    Views
    810

    Re: Sharp Mx4071 only working on DCHP

    All machines that have been refurbished get the data initialized, i usually request that DHCP machines get reserved by MAC, but the IT guy said their system is not so simple, although this is not my...
  6. Replies
    4
    Views
    810

    Sharp Mx4071 only working on DCHP

    Hi Guys,

    I installed a machine this morning using the same ip address as the MFD i pulled out. We could not get the copier to respond to a ping? So, we put the machine on DHCP and then the machine...
  7. Replies
    7
    Views
    1,600

    Re: BP-70C31 Drum Cartridge Error

    Look for the Existence detect plate (LPLTM9475FCZ2 Existence detect plate A) in the parts guide, it looks like there is a series of connecting strips on the part that locks the drums and devs in...
  8. Replies
    7
    Views
    1,600

    Re: BP-70C31 Drum Cartridge Error

    Look for the Existence detect plate A in the parts guide, it looks like there is a series of connecting strips on the part that locks the drums and devs in place, it looks like they are connected in...
  9. Replies
    11
    Views
    1,482

    [Misc] Re: Sharp Toners with "C" ending

    These are supplied by Sharp for their machines under a contract.
  10. Replies
    1
    Views
    350

    [Jamming] Re: MX-C301w not feeding

    If you take the paper detect actuator back out again what happens? i have had an actuator that got bent and was not going up up properly thus causing paper jam.

    Try that first, also the clutches...
  11. Replies
    3
    Views
    641

    Re: MX-5070N Cyan Bands and C4-20 error

    What is the part number for that?
  12. Replies
    28
    Views
    3,782

    Re: 70/71 series Developer problems

    BP Series have a charge roller and not the grid system like previous sharps, so I am optimistic about BP Range.
  13. Replies
    3
    Views
    658

    [Electrical] Re: Sharp MX2614 crum problem

    The harness can be ordered separatley: DHAI-4663FCPZ BF GN C CRUM harness (this does all 4 toners)
  14. Replies
    8
    Views
    632

    Re: Sharp MX4070 dealers logo clear

    Sounds like you need to move icons from page 3 to page 2?
  15. Replies
    2
    Views
    622

    Re: Scanning to folder tree

    Yes you can!! I have just tried this on an mx3060 (cr4) and from network folder, you press where it says input address and click browse, this will display the list of pcs on the network, click on pc...
  16. Replies
    3
    Views
    647

    Re: MX-3050N no yellow

    Does it work on copy mode? i had something similar where as print was missing a channel and copy was ok. Sim 67-17 sorted this for me, odd one.
  17. Replies
    11
    Views
    1,794

    Re: BP series Atlas/Titan Sim6-8

    If you have had them failing after install i would definitely do them on setup, the handy guide states f+1 or r+1 is OK.
  18. [Dead] Re: MX 3114N Blinking Green light won't turn on

    Download a free copy of hdd raw and see if that will see the sd card, from there, if the card is OK you can clone it to a new sd card, although firmware may need to be installed after.
  19. Re: Network Folder Scanning - Server 2022-MX-C303WH

    I had something similar on a customer who upgraded the server, turned out it needed Domain\User as credentials....try that
  20. Replies
    28
    Views
    5,393

    Re: L4-19 MX-6071

    For Clarity: copied out of operational descriptions

    Waste developer (BK) full detection operation
    There is a first collecting part where the waste developer (BK) is
    deposited inside the waste...
  21. Replies
    28
    Views
    5,393

    Re: L4-19 MX-6071

    The window you are talking about in the 601HB is for waste developer (not toner) for black, that's why it is never filled up. Otherwise it works the same as the 607HB.
  22. Re: Apple + color/black&white prints in preview

    You could try System settings - printer settings - condition settings (change from Auto to b/w)
  23. [Misc] Re: Adjustment for Sharp 4070 Saddle stitch fold position.

    IF the firmware is not too old, the Staple & Fold
    positions for Saddle Stitch can be independently adjusted
    using SIM3-10 (CJ = Saddle Stitch, CK = Saddle Fold).
  24. Replies
    4
    Views
    1,044

    Re: Sharp mx-5071 leaving black lines

    Have you got a sample?
  25. Replies
    3
    Views
    572

    Re: HP Plotter usage and costings.

    Yes it does help, all info is good, thank you.
Results 1 to 25 of 486
Page 1 of 20 1 2 3 4