We have had a few of these, some different models like the 8640 , doing this, after revisiting this one, I noticed that the time was way off and we just changed our clocks with this DST. After...
Type: Posts; User: ucinn
We have had a few of these, some different models like the 8640 , doing this, after revisiting this one, I noticed that the time was way off and we just changed our clocks with this DST. After...
I have one of these which just decides intermittantly to shut down and then turn itself back on. Updated firmware and put new surge protector on with the same results. Checked power cords and all are...
Have a LJ M4345 MFP that sends an email but won't send the attachment with the email? Anybody seen this and have a fix for it? Firmware is up to date. Thank you in advance
Transfer roller is first bet, possible dirt on laser glass also can cause this. I would try those two first
Okay, seems we have varying posts as what needs to be done to the 1027 PCU to be used in place of the d1203000. Can someone explain to me what needs to be done excatly? I would really appreciate it....
I checked a couple weeks ago and no updated one as of then.
Thanks, I already have the manual for this machine. I'm looking for a chart on what the machine is going at 4/6 A then 4/6 B..and so on. Don't know if it exists, but it would be nice if it did.
...
I have one that brings the bootup screen then freezes on 5/6 A every time...the blooming logo stops blooming and the three lights stop. Any ideas? Also, is there a list out there of what these...
New transfer belt assembly...I don't think the cleaner is a separate item on these machines.
Thanks for the reply. After posting that, she went and removed the printer from her computer again and reinstalled it again and all is working fine again now. After a google search, seems like this...
My wife has one that just decided one day to stop printing black..colors were working fine. new ink cart=no help.. cleaning the carriage assembly=no help. Removed the printer from her computer and...
I had a 9352 showing incompatable black toner carts..did this for 3 toner carts. It ended up being the main pwb... after replacing the main pwb the old toners wouldn't work in it or any other...
Because engineers have to change something or they aren't needed. There have been plenty of good machines that have been totally changed for the worse, but they have to change something to keep their...
They are crap for sure..they don't make it to life too often. There a couple TB's on it for offsetting and dirty copies. It has you change a bunch of temperature settings. I have done these on a...
The samples won't open for me either, but i'm assuming from your post that these bands are all different colors? I would guess the transfer belt is not being cleaned correctly if that is in fact the...
Having a problem with sleep mode. Goes into sleep mode overnight, when they come in the morning and hit the sleep button, screen goes to bright, but machine is locked up..can't select any buttons....
Thank you for the reply... I did all that and reinstalled firmware and reset the HDD to no avail... the Crumjoint also had no effect. It ended up being a bad main board...replaced the main board and...
After that I believe you have to select engine, then scroll to sp5810, then hit ok...then after that, turn power off to printer then back on..should reset both those codes. You might not have needed...
I believe it's just the spring on the swing plate assembly. If the spring came off, could be the problem.
Sheppard is spot on, most of the handful of ones we have had this happen...it seems to be very common with this model.
What's the fuser look like? If they do a lot of full colors the fuser can cause this especially if the heat roller has lost it's shininess.
I only have a handful of these out there and have had no problems at all with the ADFs on any of them, mostly fusers...they don't like full page color too much.
They now have an April one on the site, but when I download it and try to extract it, it gives me an error as an unknown compression type. Anyone else successfully download it yet?
Yes, you could, but quite a few of mine are in hospitals and such where there is not one primary user, but a ton of different users on different shifts 24/7... it's easier for both us and the clients...
We replace them with the 2027 fuser. The customer appreciates it also as I hear how easy the door is to close now. Horrible design.