You need to set the function version for that firmware which is stated in its release notes. Function Ver 4.2 is for the latest firmware which is currently GC1-X8.
Other than that, there is...
Type: Posts; User: Schneider
You need to set the function version for that firmware which is stated in its release notes. Function Ver 4.2 is for the latest firmware which is currently GC1-X8.
Other than that, there is...
Does this machine have any account tracking or user authentication? Locking the machine and requiring a user name and/or pins at the machine and driver to use it?
Boss drops this on me to install...
Thanks to everyone replying.
This has opened up some bulletins that I was not aware of. This has provided the solutions I was looking for!
Thanks Again
Anyone out there rebuilding fuser units for the 4 Series and 8 Series bizhub machines?
If so, where are you able to source parts?
Cheers
Hey all
Ive been installing drivers for years with no issues for KM machines using the add printer wizard but in recent months I keep getting a few windows PC's holding the device as unspecified,...
Hey All
Anyone know how to stop these machines from printing a Scan Log after each email scan?
I turned off the Log Report option in email admin settings but it still prints the reports. I had...
Thanks for your assistance.
Hey All
We don't work much with Kyocera and unsure if its possible for Taskalfa 406ci to forward its monthly meter counts via email to our office.
We have not had much luck finding any info on...
Can a HDD from a 4 series E model be used in a 8 series copier?
Part numbers are different but hey its just a HDD?
Anybody done this before?
This may not be possible without the Connector that's in the App store.
Konica 554e and Onedrive
I'm not overly familiar with the 660 but if its similar to the C6501 I would suspect the marks are coming from the fuser belt.
Can always try a stop jam the page before it enters the fuser by...
Those samples are really helpful, Thanks so much!
This is what I was referring to in my previous post.
The option is missing due to Enhanced Security is configure or Remote Panel is Configured. The only solution to get it back is to disable...
C5501 - AC signal abnormality
Manual says
-Check your Fuser for proper installation and connection.
-Replace Fuser
-Replace DC power supply
-Replace Print board
For a that short a distance no. Our machines are just wrapped in packing plastic only before shipping out to installation.
Damage generally occurs when its not secured within the truck.
Its very odd - tried a main board?
Manual is unhelpful with this one saying its had an error calculating the regressions on the test pattern and to "readjust" as the solution.
I always found these machines needed to be completely...
Sounds like they have User Authentication or Account Track enabled and the jobs are deleting because they are failing authentication.
You can log in via Page Scope Web Page Admin and look at which...
The CE Authentication option in Enhanced Security is likely disabled for 2 reasons.
Firstly and most likely is if Remote Panel is ON for client and server or if Enhanced Security Mode is ON,...
Thanks! Could not recall what it was!
Hey Guys
Does anyone know how to produce test pages for each colour C,M,Y,K for the Kyocera copiers? Is it there a maintenance mode for this?
I feel there is something not right with the charges.
Look at the Separation transfer levels in service mode and try an increasing it to help pull that paper back down off the drum.
I have had the same issue in the past, was over 5 years ago now.
Take a look at the Separation corona unit, its not hard to put a new one in.
Also make sure you drum voltage is set correctly...
Hey
Generally Konica's will display the jam code as 4 digits like 13-xx. You can also enter service mode and look at the jam code histories for current and previous codes.
A quick glance at...
In my first year back in the days of Analog copiers we had a client book a call with the displays language in Italian rather than English. Upon visiting it was revealed the user thought the language...