I've downloaded 2.0 and 1.1 and neither work. Both found under the support page. Unrecognized driver. And when it says enable pop-up I took that at it's already coded in the driver it's just a matter...
Type: Posts; User: reaser
I've downloaded 2.0 and 1.1 and neither work. Both found under the support page. Unrecognized driver. And when it says enable pop-up I took that at it's already coded in the driver it's just a matter...
I've read about this tool but I'm wondering why would I have to pay for a feature that is in the driver just disabled? Panasonic offers this same feature which we have at 8 of our 9 offices and this...
We have Ricoh Aficio 5500 and C2500 and previously on Windows XP machines the User Code pop-up would prompt on every print job. We have now moved to Windows 7 x64 and I have downloaded the PCL 6...
It does have the dongle for printing. This is actually used more for scanning with the Twain driver. And the system works on all the XP machines. I will try the Vista driver if I can find that.
I...
I can't seem to find any drivers for the 230 to work with Win 7 x64 bit. Has anyone been able to get this copier to work?
Is there any remote support capabilities for these copiers? Web based utility I can have remote access to configure?
I just took over for an IT guy and the Panasonic DP-6010 asks for a identification code when I try to access the general settings. What is the default code?
I can't seem to find the Twain drivers on any of the discs that came with the copier. Scanning, Copying and Prining is enabled on this device. I have googled twain drivers for this device with no...
Resetting the NIC fixed my problems.
I did not originally setup the NIC settings. The company we bought it from had there technician install the enabler and enter the IP configuration for our network. When I checked the Network settings...
It is a 280. The port name is IP_IPAddress. The port is set to RAW 9100. I will have to check the admin properties tomorrow as I'm working remotely right now. I can ping the 280 so what would a nic...
It doesn't appear that it ever makes it to the printer. The windows print que pops up saying it failed to print (the windows default error).
When I go to the configuration screen to enable...
TheOwl i'm not sure I understand what you are saying, install local SMB que's?
I did confirm that the printer is turned on, the enable is plugged in, and no error code is being displayed on the...
I am working remotely and now TopAccess is telling me the printer requires attention. Any idea what the likely cause would be?
The Enabler was actually installed by the vendor we purchased the device from. It is set to static. I did not enable SNMP though. I will try again, I'm just wondering should I use the PCL 6 or the...
I'm having some problems getting this device to print on the network. I can ping it by IP but when installing on the server or any machine it does not see the printer after installing the driver.
...