Do you know how to switch to level 2 also? *2 isn't doing it for me. Thanks
Type: Posts; User: mrfixit
Do you know how to switch to level 2 also? *2 isn't doing it for me. Thanks
I have a machine that we got in from a wholesaler and the send button isn't there, nor is the send button in preferences. Has anyone seen this before? I thought Universal send was standard equipment...
Hi, I have a Toshiba ES3055c that has an F106 hdd error. I went back today with a new drive and I can format it and clear the service password. When I go into firmware mode it reads the usb drive and...
Hi, can someone confirm for me if the controller radiate fan is the one this code is pointing too nfanp0082fcpz. There is also a mfp hdd fan and want to make sure I order the correct one if I can...
So I have run into this problem twice in the last week. I install the Canon UFRII driver on a Mac and every thing seems to be fine but when I try to print I get a printer in use message. The first...
We have a Canon IRADV 6065 that has gone through 4 hard drives now, You put a new drive in and it works for a couple days or a week and then it dies again. Haven't found anything on Canon's support...
I have a Canon ir3035 that periodically drops off the network and a restart will bring it back to life. We have tried replacing the nic but it didn't help with the problem. I have showed up when the...
I have a 4025 that won't recognize letter paper off the glass, it recognizes letter R, legal and ledger fine though. I have tried swapping the size sensor, adf and copy glass to no avail. I have also...
Staranges thing, customers ISP apparently didn't support ssl communication. I brought another working desktop printer with me and it wouldn't work in there office, I tried using a different email...
I haven't been back to the account yet to do an MMI clear but I remoted into the web interface and the date and time are accurate and the port was changed in service mode level 2, pretty sure that's...
I have a Canon IR Adv C5030 that won't scan to email but scans to folders fine, It gives the 801 error relating to authentication or network timeout.
I have tried 2 good email addresses from this...
Does it have to be Kodak or will the Tiffen color control patches and gray scale guide work to calibrate the Fiery? I'm on a Bizhub pro c6501 with the IC 305 controller.
Check your toner, I once had a salesman put a toner cartridge in that had solidified in his trunk in the summer heat and it read the toner cartridge was full and wouldn't stop trying to add toner. I...
Does anyone know why the toner cartridges won't turn properly when installing. I primarily see this on the black, when the toner cartridge latch is turned the gears will stick and skip. Seems like it...
The CCD fixed my problem.
what does a copy look like?
Try swapping the transfer belt unit, might be that the yellow transfer roller isn't engaging all the way.
Sounds like the web was put in incorrectly by a tech from the previous company. Pretty sure there is a one way gear on that web unit that was probably put in backwards.
Sorry if this sounds rude but if you can't figure that out on your own then you shouldn't be attempting to work on that machine or any other for that matter, as this is problem solving 101. This site...
Sounds like the clutch is never getting the signal to turn on, check the sensor before the reg clutch. If you don't know how to in simulation on this model, tape the sensor arm down and see if the...
9401 is a ccd scanner issue, does the lamp light when you turn it on?
Can't really say what's best but I am not a big Canon fan, they have kept the same boxes for years from the np series to the IR series 5000 and alike, and not a big fan of the smaller ones they came...
Wasn't too bad, dumped it, vacuumed it, then stuck an empty toner bottle in and ran install mode to get any toner that might be left between the bottle and dev unit, revacuumed and added genuine...
Bad Katun toner, purged the system and put genuine toner in and it looks marvelous. Thanks for the help, wanted to make sure I had other things to try if the toner didn't do the trick.
If they are chargeable tell them they have to be replaced as a set. Give them a huge quote and sick a salesman on them and save yourself a lot of potential headaches.