can you not use secure print? personally we prefer to set this up as you wont need to create each individual user box on each device. the users can create the credentials themselves, it then creates...
Type: Posts; User: Kenny
can you not use secure print? personally we prefer to set this up as you wont need to create each individual user box on each device. the users can create the credentials themselves, it then creates...
hi guys,
had a couple of machines lately that will not scan to HOSTAME of the PC but will scan to IP address instead,
at one site we have x5 users set up to scan to SMB folder on the C drive x4...
Never mind sorted it guys,
Replaced the colour rollers in the transfer unit
Hi guys,
we have a C7000 that has a yellow issue 62177
we did a swap test with the magenta developing unit which the issue did transfer to the magenta, so we have replaced with a new yellow...
Hi guys,
we have currently got x2 Sharp MXC301w's that are going into a customers that requires scan to email,
has anyone had any issues regarding set up of scan to email for these machines?
...
Thanks buddy !! Have a good weekend !!!
Sent the wrong toner to a customer and they are desprate to print
Wondering if the toner is the same and if you can addapt it to fit ?
1060 toner a3vx251
3070 toner a3vx256
cheers as...
Hi guys,
does anyone have a parts manual for a Ricoh MPC6003 doc feeder, i have the normal parts guide for the machine but it doesn't list the document feeder?
only have a handful of machines...
Hi guys,
Got a weird one. I just recently installed x2 C550i's, all up to date firmwares
They both have been set up with User Authentication/ID & Print.
The users are wanting to change...
As the title says really
I know the old 4 series were same as Lexmark ?
Just looking for a cheaper drum than the KM ones as going through loads ATM
thanks in advance
I will give that a try, hopefully it works
hi guys,
we currently have a C300i and C550i at a customers site and are wanting to print from their chromebooks,
the machines currently have account track on, their IT has tried to print from...
if you remove the paper exit section and on the left hand side you will see the gate solenoid, it has a black arm that actuates the solenoid, we tend to cut off the guides for the tray units (plastic...
Hi Guys,
haven't got an issue but was just wondering is there some really handy tools/software to have in general for engineers,
we currently work on a wide variety of photocopiers and do a lot...
legends will give it a go when next on site
thanks for the suggestions
Hi guys,
Have a machine that's is throwing E7-93 now and again, I have adjusted the current print drivers and firmware On the machine rebooted and the error code is cleared,
The machine can...
1. We can enter the admin password to log in but when you try to adjust anything in admin mode the onscreen keyboard doesn't pop up, also happens in utility settings
2. There are no drivers as I...
hi guys,
got a new Konica Minolta C450i that when you go into the admin settings it doesn't bring up the on-screen keyboard?
potentially thought this was a software switch setting but checked...
probably already been checked but had a similar issue with a Konica C658 sending one scan to email then failing for the rest,
turned out to be because of an IP conflict with the machine and one of...
had to email konica for the actual intialisation codes, input into the machine and now the web browsers are working!
Full initialization and let the machine pick up details via DHCP
and the latest firmware for the machines, paper cut hasn't been installed yet as want to make sure the Web browser works on the...
hi guys,
got x2 C658's that just will not enable to the web browser option(for papercut), they both had license management errors but i have managed to intialise/repair the error,
when trying...
Good Morning,
Ive got a quality issue with a Konica Minolta C658,
Ive replaced the cyan drum for blue lines, calibrated the copier cleaned IDC sensors and all the halftones are perfect but when...
hi guys,
got a Konica C454e that is pushing magenta dev onto the drums charge corona which is resulting in magenta stripes on the print outs.59807
we have replaced the magenta drum/dev, cleaned...