Hello,
I'm having trouble installing a Canon ir7105 without a Fiery, can anyone help?
I've set everything up but nothing prints to it. I've installed lots of Fierys in the past but can't seem...
Type: Posts; User: copycentre
Hello,
I'm having trouble installing a Canon ir7105 without a Fiery, can anyone help?
I've set everything up but nothing prints to it. I've installed lots of Fierys in the past but can't seem...
Found the answer!
The dipswitch 14-7 was set to 1 instead of 0: the machine was set up for network printing from the machine and not the Fiery! Changing it and restarting everything fixed it all,...
Oh just another thing to mention, the ethernet ports on the Fiery do seem to be working, they both flash up with lights once plugged in..
And I have used a crossover cable between the Fiery and...
Hi Everyone, I've got a stupid problem that should be absolutely routine but for some reason isn't working for me!
I'm setting up a Konica C6000 with bolt-on EFI Fiery.
The Fiery starts up OK,...
Thank you. I managed to do it by turning the main power off, then turning it on while holding down the counter button during the startup. Managed to get into service mode fine!
Hello,
We've got a C6000, and I'm trying to reset a fuser error code but can't get into service mode for some reason.
The machine start up screen shows the error code, so I press...
Amazing, thank you.
I've unplugged, inspected and replugged the connections. The strange thing is that it does boot up and play the little tune, which I thought meant that everything was OK.
...
Just as an update:
I've deleted all jobs on the DAC (key operator mode), restarted it, no success
I've restored the DAC network settings, reassigned the IP address, still no luck
I've...
Hello,
We've got a problem with an Oce 3165 DAC, in that it boots up, can be seen by the machine, can be pinged by PCs on the network, but won't print! I've tried the obvious things like turning...
Hi
Tried that did not help it looks to me like a frame erase problem on oll the copies if you do sky shot, it's not even on all of them but duplex a4 it's v bad
ps now have a manual
Thanks, that's amazing!
Would you know which adjustment it is?
I thought it might be 'Print Centring Adjustment' but I can't see an option for the duplex side only. Unless I'm missing something obvious?
We've replaced all the rollers and we're still getting the problem. The strange thing is that there is no skew, so I was wondering if it could be fixed in Service or Key Operator mode.
It seems to...
Hi Everyone,
I've got a problem with a Konica Minolta Bizhub C500 Pro. The second (duplex) side of an A4 print has a very fat top margin (8mm+), and it can't be corrected with an image shift in...
Thanks, I'll give it go..
Hello all,
We have a Canon ir-7095 which is producing light, uneven copies (some parts are darker than others). I've hoovered out the dev tank, installed new (genuine) toner, and changed the...
I'll work on getting a scan. It's a mostly even magenta background, that starts off very faint and gradually gets stronger during a run. It is stronger at the top and bottom parts of the sheet, with...
Hello, we've got a Canon CLC3220 problem that I can't get my head round.
The problem starts during a run where a magenta background gradually gets darker. The first time this happened, the drum...
Hello,
We've got 3 ir105s and 2 CLC3220s (all with EFI Fiery's) but we also send a lot of faxes on a tiny, awful, slow fax machine that only holds about 5 pages.
Seeing as our Canon's are high...