Hey everyone:
how to configure the IP address for ic-409 in my bizhub c550
Type: Posts; User: bbamouad
Hey everyone:
how to configure the IP address for ic-409 in my bizhub c550
hi,
i have a bizhub c451, the copy does not work after firmware update, it gives me black squares across the page.
thank you
thank you for your reply,
my machine is out of warranty and my dealer is not longer supports the Konica Minolta.
ok; but where can I find the new firmware? you have a link?
no.
yes, I clean the laser glass, the problem is that the black is very dark, even the texts become bold!
no, i use only the original km toner.
I thought that the toner can cause the problem, but the new toner gives the same result!
yes!!
Hello everyone,
I have a bizhub c451 and it prints everything very dark these days, I changed the black IU, and the fuser, I did a total cleaning of the machine but nothing has changed.
Here are...
thank you very much "emujo"
it works!!
First, the printer starts with a black screen. then i remove the NVRAM card and restart :
- The "clear select" display on screen
- I return the NVRAM...
thank you very much;
bbamouad@hotmail.com
Now I found a 64MB card
thank you very much "emoju";
I spent the whole afternoon yesterday looking CF card, but I did not find 128MB, it's only 512MB available (or more 2-4-8-16 GB).
if the 512Mo CF is valid i can buy it...
I understand you all, and that is why I ask your help ?
and for skills, I am an electrical engineer with over 10 years experience
I think it enough to update a firmware ... with a some help:)
can you send me this firmware
I have a C451
bbamouad@hotmail.com
no chance, I don't know any km service, and so far, i'm always repairing it with success.
then, is it possible to make these maneuvers with your help ?:o
thank's
I don't replaced anything, I just made a test by removing the NVRAM, I was told that the NVRAM should be sent to Japan for repair.
I made a small diagnosis and i think it's tow options possible :...
hello everyone;
excuse me, my English is very bad :o
my printer bizhub C451 does not boot, crash on hourglass, and when i remove the NVRAM module "small card with battery" it start and tells me...