Hi guys, I need to know the key counter or coin vendor in canon IR7105.
how the connector looks like and the wiring diagram.
number of the connector should be inscribed on the connector.
And which...
Type: Posts; User: ferastec
Hi guys, I need to know the key counter or coin vendor in canon IR7105.
how the connector looks like and the wiring diagram.
number of the connector should be inscribed on the connector.
And which...
Dear Team
can some one guide me and send me the way of connecting the key counter cable for the below model...
I will need also to enable the accounting method on the devices to enable the key...
Dear Team
can some one guide me and send me the way of connecting the key counter cable for the below models...
I will need also to enable the accounting method on the devices to enable the key...
any ricoh model
the issue, that the EOP is not able to check the inbox
hi guys
i have an issue with every one print using office 365...... it never work:(, any advice?
Hi guys, have you found a solution for this issue? As I have the same but pcc4 takes almost 40sec, the equitrac which I have installed is V5 with Pcc 4.2.1
Dear Team
i have installed Eq v5 as demo for VIP customer, and i have done the configuration for PCC4 V 4.2.1, and the test was working perfectly fine last week.
today we have switch on the EQ...
guys i do have a real frequent failure in the sleev unit, do you guys has the same issue?
Guys, we have got a new tools call active management from Ricoh, it should work well and it can manage your MIF
regards
Dear Team
i have around 10 machines MP9000 with SR5000, but if i connect the SR5000 to the MP9000 it work as tray up and down and self check, but it did not show any finisher tap on the LCD,...
hi, i have found the issue, what i have done is , i have installed the DCE on the site print server and point the MFP PCC to the site office Printserver.
not i am not sure if the MFP will work...
Dear team
i have done multiple equitrac site implementation.
The case as follow:
Head office has already running Equitrac Office with 30 MFPs and the site office has 3 MFPs, the customer want to...
i have tried the same (soeed of the network to hulf dublex) but same issue.
i am thinking that the memory in MP8000SP (512 MB) is not reaaly supporting this type of printing, as each and every page...
hi guys, i have got the solution;)
If you want users to self-register their swipe cards, you must enable this option in System Manager. When
a user swipes an unregistered card, they are...
yes, i have tried that, but still no chance,, there is SP 5-811-5 which is showing the orginal serial number and that i can not change it.
should be a way like older machines...
thanks boss, i will try that tomorrow, hope it is going to work or else i will be out from my job:(.... but do you think that the command which was sent to the machine is not using PS language and it...
Dear Guys
I have done equitrac office installation, now i will have to assign the users HID card ID to their PIN number in Equitrac user profile, but we do have 800 users +, to add the ID...
Dear Guys
For export reason, i have to change the serial number for MP6001 for customer own serial number, but when i have access the factory SP mode, i have changed SP 5-811-1 as well as SP...
ohh, do you think if i put the setting in the machine as half dublex this might work..
thanks dear dear, you give me some hope :), but what type of issue you have faced? is it the same?
Dear how and what to do to change the switch/router print speed?
Dear All
i have problem while printing from Solaris 10 (Unix), The issue here, that it is unix system and in unix system you will have to run a scrip only form TAR file to configure the printer....
Hi guys
I have remote fax installation in MPC3002, i have tried to configure in the sub machine, but i could not add the IP address of the master machine, i think i have done something wrong, can...
Thanks dear, I have. Done the same, but how to do the server installation?
Hi team,
I need your help, i have one demo for MP8000 and thecustomer want to install it with solaris 10, i really have no idea on how toinstall the printer with this OS.
Kindly advice in step by...