Allow me to quote from my distinguished colleague from the great state of Iowa, "The cam you have highlighted is the one that moves the thermistor back and forth on the upper fuser roller to prevent...
Type: Posts; User: MichaelConway
Allow me to quote from my distinguished colleague from the great state of Iowa, "The cam you have highlighted is the one that moves the thermistor back and forth on the upper fuser roller to prevent...
As you know the question was based upon a Canon iR7105, a B&W copier. Thanks for the followup!
http://www.copytechnet.com/forums/attachments/canon/6496d1286472314-7105-fuser-web-not-turning-clc.jpg
The highlighted area does not state what is happening when SL4 is turned on. Could be...
Literally crack it???? ;D
also, whilst you have the p/u assy's out check the pre-reg sensor. If it is worn , you will have jamming issues. It is easy to replace with those parts out. mrfixit51, correct me if I am wrong. :p
Don't bother applying if you currently work for a Canon dealership!:confused:
Still looking....patiently!
I haven't heard of them. It couldn't hurt to talk to them. If they offer a comany vehicle, that is a huge perk. What's the worst that could happen, they would just offer you something lower than what...
who is the company?
The job would be M-F 8-5, which is nice. I know you have experience with those particular models, but if you aren't "trained" it doesn't mean much. Expect to be offered in the $10-$15/hr range.
I wouldn't hold my breath. Copier techs do not make much money. Any extra money they do make is usually based upon bonuses or car allowance, if you play the game right. The base salary is usually...
Those are all the same reasons I left Orlando 7 yrs ago!! Florida is NOT the paradise people seem to think it is...
RAM INIT will erase all machine/user settings in the copier and set it back to factory default. If you are going to do this, be sure to enter all settings from the door specs and note all customer...
ensure the optics are clean (all Mirrors) and ensure the label on the drum matches the service mode machine settings. You may have to set BIAS to -10 to -25 in some cases.
This fix will have to go through Canon. They will have to get a serial number and then send you out a Main Controller and Serial Number PCB as a set. I had this happen to me one time.
Unless they actually use RUI, I wouldn't worry about it.
I am a factory trained, experienced (14 yrs.) Canon copier technician looking to relocate to the Seattle, Washington area. Resume` and training certs available upon request. email mandrconway@q.com