Thanks for your reply, much apperciated!
Yes I can see the language selection in the fw update screen, I tried the update with all languages selected and with just a few languages selected.
If...
Type: Posts; User: -ph-
Thanks for your reply, much apperciated!
Yes I can see the language selection in the fw update screen, I tried the update with all languages selected and with just a few languages selected.
If...
Hello,
I have a C308 and I want to change the language but I only see English in the settings:
53387
I performed clear all data
upgraded the fw to version GCA-X4 msg97 and even tried an...
Found it!
I used the wrong loadable driver [G00-01], should be G00-02.
Hey rrrohan,
I already checked the service manual for the error code , the loadable driver and the fingerprintreader should be correct. In the meantime we managed to get it to work on a bizhub...
Hello,
We're trying to install a biometric authentication unit [AU-102] to a bizhub C258, but when we install the loadabe driver we get the error code C-C212. We tried this to install this driver...
I managed to replace the gear but it was quiet a job.:(
The easy part was taking out the ejector unit which wasn't that hard after all (once the stapler unit was out). Opening the ejector unit...
33783
I need to replace the gear [12, see image] from the ejector unit. I'm afraid there's no other option than to remove the ejector unit, any new tips?
Anyone ever heard of this code? When I check the service manual I can't find this code. The machine was recently updated to the latest fw release. I don't know when the code is generated but there...
OK, it wasn't the fuser motor but the exit sensor (PS3). When I got back the machine was constantly jamming in exit section, so it was pretty easy to detect the problem. Thanks for the support anyway.
You used to be a total dick, now you're just a bit of a dick. Welcome to dickclub! 😉
thanks for the quick reply, i'll try the fuser motor first
Had the same problem today with a c244e, first checked the exit unit, registration and door.
also got the fuser drive out of the machine to check CL8 (looked fine, but cleaned it anyway) and it's...
you mean unselect and select the PK-type in service mode and restart?
Not quite an answer i was hoping for but thanks for your reply.
Hi,
I'm having trouble with paperjams in the punch unit.
the paper stops in the punch unit for an unknown reason.
i checked all the connectors and switched the sensors
i oiled the punch unit,...
could be just the pu-rollers or the clutches from the LCC, which causes a timing issue.
Thanks
p
Hi,
Today I ran into a problem with scan to SMB, is there something changed in de new os version? Customer also had another mac runnin os10.4 wich was working fine for SMB scan.
gr
problem solved, it was just a matter of bending the scanner back in its correct position, trail and error, luyckily it was pretty easy.
Are you sure about the code? I checked manual version 3.0 but no result. I remember with older models this code had something to do with the paper lift drive of the manual feed, did you checked that?
Thanks for the response, i'll try to bend, hope it will work out.
Hi,
This afternoon I ran into this problem, when making an A3 scan from flatbed there's one corner with background [the corner nearest to the operating panel] if I make the same scan from the...
Hi,
Does anyone have any experience with scanning directly to a folder on the internet, I guess it won't happen with SMB-protocol but with FTP maybe?
any thoughts, bring it on...
clean mirrors in scanner
execute 'initialize and stabililasation' and 'gradation adjust' [menu: Image process adjustment]
needles to say that your copies will never be as good as your prints of...
I have an olivetti d-copia 2500MF [KM 2560] with a very strange problem during duplex printing or copying. If I launch a job for duplex printing the machines stops printing mostly at the fourth page....
I'm pretty sure it has something to do with the toner, had same problems in the past...