Search:

Type: Posts; User: Polo-022

Page 1 of 19 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    1
    Views
    106

    Re: MP307 eating cyan toner

    Replace Cyan PCDU. Particularly, the PCU eats toner when it fails.
  2. Replies
    3
    Views
    402

    Re: Mp c307 bypass

    No bulletins at all!
  3. Replies
    2
    Views
    575

    Re: Mp c4504asp scanning mode

    Image is reduced when scanning to email only

    I found this...
  4. [Misc] Re: Ricoh sp 300dn printing only white pages, not printing anything on paper

    Check Laser Beam Path for obstacles.
  5. Replies
    2
    Views
    575

    Mp c4504asp scanning mode

    I have a scanning mode problem with this machine.
    Scanning from platen glass, the image is shifted too much and a black border
    appears on both sides(Short Edge-Long Edge). When i print the scanned...
  6. Thread: mp 2014

    by Polo-022
    Replies
    7
    Views
    778

    Re: mp 2014

    Reset the corresponding counter through diagnostics.
  7. Replies
    29
    Views
    3,853

    Re: Yellow print on RICOH MPC 6503

    It must be the Yellow Developer Unit. The Toner Density Sensor has failed.
    Replace as required.
  8. Replies
    14
    Views
    4,764

    Re: Mp c3004 paper jam code 019

    Fuser Unit Replacement stopped paper jams. It was a premature failure of it
    and i did not take the risk to re-oil the pad, or to replace it.
    Thanks again for your support!!
  9. Replies
    14
    Views
    4,764

    Re: Mp c3004 paper jam code 019

    My next step will be transfer assy replacement, to check mostly the wiring of fuser entrance sensor and the next fuser replacement, or parts of it. I have to say that there are no broken gears, or...
  10. Replies
    14
    Views
    4,764

    Re: Mp c3004 paper jam code 019

    Well, i did the same thought, but i didn't replace it yet, but i will, tomorrow!
  11. Replies
    14
    Views
    4,764

    Re: Mp c3004 paper jam code 019

    It curls just like an excessive damp paper, no dog ears, it never enters into the fuser area. Yesterday i replaced side door interlock switch, today i have reports that it is jamming again.
  12. Replies
    14
    Views
    4,764

    Re: Mp c3004 paper jam code 019

    Firmware is up to date and the feed rollers are at a very good condition.
    No missfeed jams.
  13. Replies
    14
    Views
    4,764

    Mp c3004 paper jam code 019

    Machine jams randomly, paper does not entry into the fuser.
    It curls just under the fuser module and it happens from all trays,
    same thing, even if it is A4 LEF, A5, A4SEF.
    Counter is : 155Κ Βκ &...
  14. Replies
    7
    Views
    1,332

    Re: Ricoh MPC2800 cyan overtoner

    D023-9660 Developer material/Cyan.
    D029-3035 Development unit/Cyan.
    Original parts MP C2800.
  15. Replies
    13
    Views
    2,395

    Re: blurred copies Ricoh mp501

    Humidity condensation on the drum which has been exposed to humidity overnight.
    It usually happens where there is not a well ventillated room.
    I use to polish the drum and properly dust it with...
  16. Hp designjet mfp t2500 service code 61.08.02

    Only when copying, not at scanning or printing mode and it happens randomly,
    but very often. I replaced HDD first of all and it was working for several months,
    but now it appears again! Ofcourse i...
  17. Replies
    14
    Views
    1,682

    Re: mp 2014 paper jam

    Paper end switch actuator has been deformed, or
    the metal base where switch is mounted,
    giving faulty messages to the controller.
    In addition to this, replace friction pad.
  18. Re: No black on colour prints and colour test page on ricoh mpc4503

    Laser Unit synchronization maybe! I have seen that sometimes back in the days of MP C2500.
    It recovered itself somehow...
  19. Replies
    4
    Views
    867

    Re: Ricoh C305 SC 681 11

    Electrical noise, power cord, grounding, network.
  20. Replies
    8
    Views
    6,996

    Re: Mp2501, Overtoner after toner replacement

    Yes Codex, i have the same problem with this Ricoh model. Not very often, but it happens.
    PM at 50K. prints, seems to be normal.
  21. Replies
    5
    Views
    1,284

    Re: Ricoh MP 6002 Paper Tray Reset Message

    It is the tandem tray rail. Screws that secure it at three points have been loosen.
    Remove the lower left cover and pull all the way out tandem tray to repair it.
    Very common on Martini series and...
  22. Replies
    2
    Views
    630

    Re: sp c360 printer sc 332-01

    Sp c362dnw printer - sc-332-01Take a look here Mikado...
  23. Replies
    10
    Views
    1,575

    Re: Ricoh MP 301 overtoned

    Yes, it doesn't work.
  24. Replies
    10
    Views
    1,575

    Re: Ricoh MP 301 overtoned

    1. D127-2212 New Type PCU. (First of all)
    2. SP2-921-001 set to 1
    3. SP2-922-001 set to 0,2
    4. SP2-929-001 set to 3V
    5. SP2-932-001 set to 2 or 4.
    It works : PCU relability, over 40K. prints....
  25. Replies
    13
    Views
    45,237

    Re: Ricoh wide format W3601 image skipping

    Well, these days i work on a similar-maybe-the same problem with an MP W2401.
    PS driver has been installed, downloaded from the Ricoh site and the O.S is Windows 10 Pro.
    When i use Adobe Reader to...
Results 1 to 25 of 462
Page 1 of 19 1 2 3 4